Announcement

Collapse
No announcement yet.

More Crosses

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • More Crosses

    Both are Sue Mey designs. Made out of 3/4 inch Poplar.
    Brian in the Four Corners

  • #2
    So nicely scrolled!! Great work.
    AKA Paul from Washington State

    Comment


    • #3
      Very nice! What size did you make them?
      Linda at www.ArtIngrained.com

      Comment


      • #4
        8 x 10. I want to make them a little bigger next time. Probably the same size as the themed crosses Sue Mey sells.
        Brian in the Four Corners

        Comment


        • #5
          8x10 is still a nice size. Just right for some of the smaller apartments and homes these days. Maybe too big for those "tiny houses" that are the supposed rage.
          Linda at www.ArtIngrained.com

          Comment


          • #6
            How long did they take to cut?
            Betty

            "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

            Comment


            • #7
              Originally posted by will8989 View Post
              How long did they take to cut?
              About 2 hours.
              Brian in the Four Corners

              Comment


              • #8
                Brian those came out great. 3/4" is tough to cut when dealing with delicate designs but you pulled it off.
                Scott
                Creator of fine designer sawdust.

                Comment


                • #9
                  Excellent cutting. What blades did you use?
                  Rolf
                  RBI G4 Hawk, Delta SS350, Nova 1624 DVR XP
                  Philosophy "I don't know that I can't, therefore I can"
                  Proud Member of the Long Island Woodworkers Club
                  And the Long Island Scrollsaw Association

                  Comment


                  • #10
                    Originally posted by Rolf View Post
                    Excellent cutting. What blades did you use?
                    FD #5 reverse tooth mostly. Some with the Pegas #5 as well.
                    Brian in the Four Corners

                    Comment


                    • #11
                      I like using the #5 petals on popular. Gives a clean cut.
                      Betty

                      "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

                      Comment

                      Unconfigured Ad Widget

                      Collapse

                      Latest Topics

                      Collapse

                      • will8989
                        Advent wreath
                        by will8989
                        For one of my good customers. From the fall issue 2016. Cherry and African mahogany. Bruce turned the candle holders as we couldn’t find candles to fit any already made wooden holders. I used the green sparkle unicorn spit over green paint for holly leaves and red for the berries. Yes, I actually...
                        Yesterday, 11:39 PM
                      • Ennobee
                        Reply to 10" long truck.
                        by Ennobee
                        Looks pretty neat. So it's from a 2x4: 3 in wide, 'bit less then 2 in. high? So how did you get the trunk cut out? You mentioned cutting the sides with a scroll saw, did you slice off two sides and then cut out the middle?...
                        Yesterday, 09:46 PM
                      • vgraf
                        Reply to sanding sealer or shellac
                        by vgraf
                        I use sanding sealer on baltic birch plywood, pine and birch if I am going to stain them. Without the sanding sealer, the stain will be blotchy. I use the water base sealer from minwax. After it drys I sand to at least 150 grit and often to 220 grit. Wipe it with a tac cloth then apply the masking...
                        Yesterday, 08:27 PM
                      • Jim Finn
                        Reply to 10" long truck.
                        by Jim Finn
                        We, our club, delivered over 900 toys last week to The Salvation Army, Ronald McDonald House, and a local children's hospital. Included were most of these trucks. (I sold a few)
                        Yesterday, 07:17 PM
                      • NC Scroller
                        Reply to sanding sealer or shellac
                        by NC Scroller
                        The real nice thing about using shellac and alcohol mix for ornaments is you only have to wait minutes before you tie in your ribbons and packaging.
                        Yesterday, 10:48 AM
                      Working...
                      X