Announcement

Collapse
No announcement yet.

A Birthday Present

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • will8989
    Reply to Bruce, the one on probation
    by will8989
    Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
    Today, 10:32 AM
  • Sandy Oaks
    Reply to Shrink wrap systems
    by Sandy Oaks
    As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
    Today, 09:46 AM
  • NC Scroller
    Reply to Bruce, the one on probation
    by NC Scroller
    I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
    Today, 07:42 AM
  • NC Scroller
    Reply to Shrink wrap systems
    by NC Scroller
    I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

    To use the bags you will need a sealer. I have one very similar...
    Today, 07:39 AM
  • Linda In Phoenix
    Reply to Shrink wrap systems
    by Linda In Phoenix
    I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
    Yesterday, 10:01 PM
Working...
X