Announcement

Collapse
No announcement yet.

Martin Luther King JR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wsmith0896
    replied
    Excellent job, very good work.

    Leave a comment:


  • AirNationalGuardMom
    replied
    Excellent job Mark.
    Linda

    Leave a comment:


  • penquin1
    replied
    Great looking cutting, nice work, thanks for sharing it with us all.
    jim
    penquin

    Leave a comment:


  • tony coleman
    replied
    looks good mark,well done

    Leave a comment:


  • Markru2002
    started a topic Martin Luther King JR

    Martin Luther King JR

    Hello all,
    Here is my latest portrait. It is made from 1/8" baltic birch ply. The backing is black felt and I have applied the felt to thick cardboard because the cutting is fragile. I applied lemon oil and 2 coats of spray poly. I got the pattern on here in the archives. Any suggestions and comments are welcome. Thanks.
    Mark
    Attached Files
    Last edited by Markru2002; 08-25-2011, 07:19 AM. Reason: add picture

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • will8989
    Reply to My beauties
    by will8989
    He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
    Today, 10:55 AM
  • Rolf
    Reply to Cutting guide for straight cut on a scroolsaw
    by Rolf
    Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
    Today, 07:54 AM
  • Rolf
    Reply to My beauties
    by Rolf
    I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
    Today, 07:49 AM
  • NC Scroller
    Reply to My beauties
    by NC Scroller
    You are one busy lady. About how long does it take to cut one?
    Today, 05:51 AM
  • NC Scroller
    Reply to Hegner Multimax-18 for sale Tucson
    by NC Scroller
    Good luck.
    Today, 05:47 AM
Working...
X