No announcement yet.

Jewellery box

  • Time
  • Show
Clear All
new posts

  • Jewellery box

    A oak jewellery/ring box i have made for my missus
    pattern from Steve Good
    Attached Files

  • #2
    Sweeeeet cut darcy2460, that project is on my every growing To Do List.
    What kind of wood is it? Thanks for posting yer picture, always a pleasure to see what other members are working on, gives food for thought too.

    What part of....
    A oak jewellery/ring box
    don't you understand.....GIGGLE...Runnin really fast.
    Last edited by wood-n-things; 06-18-2012, 11:26 AM.
    Gloria ............... Two memorable things to say in life, "Hello" for the first time, and "Good-bye" for the last.


    • #3
      Very nicely cut! Thanks for sharing it with us.

      Life is hard. It is even harder when you are being stupid.
      John Wayne


      • #4
        Very nice. I am also curious about what kind of wood you used here? Did you have any problems cutting the sliding dovetail straight?

        I'm multi-talented: I can talk and piss you off at the same time


        • #5
          As far as i know it is Silky Oak but im not 100% and yes Dave J it wasn't easy for me anyway lol it will only open one direction lol


          • #6
            Very nice, really like the dovetail slider lid. Another idea for the future , thanks for posting.



            • #7
              Very nice - and the color of the wood is gorgeous! I'm going to have to get that pattern just because I am intrigued by the dovetail sliding lid -- that one's new to me and I'd love to see how to do that. Bet your wife really loves this!


              Unconfigured Ad Widget


              Latest Topics


              • Rolf
                Reply to Arizona Animals Intarsia Collage Fair Results
                by Rolf
                Our Judges are some of the best woodworkers I have ever met. On occasion I get asked to explain what I look for in the scrolling categories. I point out all of the nuances. I can't be a judge as I have intarsia and scroll work entries.
                Today, 07:36 AM
              • Rolf
                Reply to Problem with thinner blades on Dewalt 788
                by Rolf
                There may have been some crud on the tips from manufacturing.
                In the ~20 years of scrolling I never cleaned the ends of my blades until recently. Even with the Pegas clamps I was having some blade slippage, I now scuff the ends of my blades with some 220 grit paper End of problem.!...
                Today, 07:29 AM
              • NC Scroller
                Reply to Problem with thinner blades on Dewalt 788
                by NC Scroller
                Don’t over sand them as you will shorten their usable life. Only sand as needed. Another thing to do is clear your blades before installing. Blades are coated with oil to prevent rust. Wipe the ends with alcohol or lightly sand with 320 grit.
                Today, 05:29 AM
              • cwmagee
                Reply to Problem with thinner blades on Dewalt 788
                by cwmagee
                The fact that you only had approximately 6 hours on the saw tells me there was a thin oily film on the clamps from the manufacturing process.
                If problem continues you may have spread the clamps in the process of tighten blades. A common problem with OEM parts. This issue will disappear by replacing...
                Yesterday, 08:46 PM
              • will8989
                Reply to Mitre saw material clamps
                by will8989
                10” compound dual bevel sliding mitre saw with laser. Bruce said to buy a new blade because the blade that comes with it sucks. Sells here for $289. It was on sale plus his military discount and a $50 gift certificate from his woodworking club. Bruce said to check out on Google 10” kolbalt mitre...
                Yesterday, 08:45 PM