Announcement
Collapse
No announcement yet.
Latest Projects I have Completed.
Collapse
X
-
The shell is really nice the grain really pops. The boxes look great also. What will they be used for?Rolf
RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
Philosophy "I don't know that I can't, therefore I can"
Proud Member of the Long Island Woodworkers Club
And the Long Island Scrollsaw Association
-
Nicely done on all of your projects."Still Montana Mike"
"Don't worry about old age--it doesn't last that long."
Mike's Wood-n-Things LLC
Comment
-
Originally posted by Rolf View PostThe shell is really nice the grain really pops. The boxes look great also. What will they be used for?
DWLife is hard. It is even harder when you are being stupid.
John Wayne
Comment
-
To tell you the truth Paul I do not know what the angle is that I cut this one. I took a 2x4 and drew a line on the end from the upper left corner to the lower right corner and cut that on my bandsaw. I believe it was 26 wedges that I cut.
DWLife is hard. It is even harder when you are being stupid.
John Wayne
Comment
-
As always, excellent work, DW! It was nice to have met you at the Cleveland scrollers picnic!
Paul
Comment
-
DW,
Great to meet you at NEOS... wish we could have spent more time.
As far as the angle, when the shell comes around like that without making a real large opening, that corresponds to lower wedge angles... see Steve Garrison's drawing that shows the shapes for various wedge angles. I'm only guessing, but I'm thinking about 18-20 degrees on that one.
What did the shell's overall size turn out to be?
Spence
Comment
-
Spence,
The over all size of the shell was almost 6 inches the ring it is sitting on is about 3 1/2 inches in diameter. It was great meeting you as well at the picnic as well.
DWLife is hard. It is even harder when you are being stupid.
John Wayne
Comment
Unconfigured Ad Widget
Collapse
Latest Topics
Collapse
-
Reply to Question about tilting head sawsby Jim LowderThank you everyone. I guess I just need to scroll more and have more patience with my abilities. You all are amazing...
-
Channel: Welcome Members
Today, 08:08 PM -
-
Reply to Cutting Airby evilbadgerHow thick is that foam Randy? That turned out really nice.
The view on the house is nice but that 11 foot 3 ceiling height is killing me....-
Channel: General Scroll Saw
Today, 07:56 PM -
-
Reply to Question about tilting head sawsby RolfI have both types of saw A tilting table Hawk g426 and an Older Excalibur with a tilting head. Unlike Carole for bevel cuts I prefer the tilting head I do larger projects and it is easier for me.
Regarding compound cuts they are cut at 90 degrees.
If I were in the market for a new...-
Channel: Welcome Members
Today, 05:38 PM -
-
Reply to Question about tilting head sawsby handibunnyIf you have a good saw, and can set the table accurately, you should be good to go. Give a holler if you need help. ๐
Randy, I swapped out the clamps on the Jet for the Pegas clamps as soon as they became available. I found the Jet clamps just too fidgety for my taste.-
Channel: Welcome Members
Today, 05:09 PM -
-
Reply to Question about tilting head sawsby Jim LowderThank you all for the info. Sounds like itโs talent or practice issue not my saws. Wife already gave permission to buy a new one. I will wait tho
-
Channel: Welcome Members
Today, 04:51 PM -
Comment