If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
This is my latest clock. It was made using Mahogany and Cedar. The clock insert is 3 inches the clock itself is 4 inches square. It was finished with tung oil and satin lacquer.
I once was a Flying Dutchman fan but now use Pegas MGT almost exclusively. Nothing wrong with FD but I find the Pegas sharper and a bit more aggressive which I like. I do keep some FD blades around but mostly the small sizes like their puzzle blades and 2/0 spirals. As Dan and Linda said you really...
I swore by Flying Dutchman when I started, but the offset when using a #3 and smaller gave me troubles. I tried Pegas Modified Geometry and never looked back. Little to no sideways drift and sharp.
But as said, try several and see what works for you
The 12" throat may be an issue for some things. If you are scrolling an 8x12 piece, at some points on the wood you will not be able to turn the piece completely. There is no tilt that I can find, so as long as you do not use a bevel cut it should be fine. They do not say, that I could find, the...
Tweet
