Announcement

Collapse
No announcement yet.

My first scroll saw project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My first scroll saw project

    i used Karl's box design and it went ok
    first puzzle box - a set on Flickr

  • #2
    Looks good. Thanks for sharing that with us Jesse.


    DW
    Life is hard. It is even harder when you are being stupid.
    John Wayne

    Comment


    • #3
      Keep up the good work.... There is a Scroller Gallery on this site where you can post your pictures as well if you care to. They will show up on the home page for a time until new photos are uploaded.
      Douglas Fraser
      Eagle River, Alaska

      My Gallery - Aurora Wood Crafts

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • will8989
        Reply to My beauties
        by will8989
        He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
        Yesterday, 10:55 AM
      • Rolf
        Reply to Cutting guide for straight cut on a scroolsaw
        by Rolf
        Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
        Yesterday, 07:54 AM
      • Rolf
        Reply to My beauties
        by Rolf
        I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
        Yesterday, 07:49 AM
      • NC Scroller
        Reply to My beauties
        by NC Scroller
        You are one busy lady. About how long does it take to cut one?
        Yesterday, 05:51 AM
      • NC Scroller
        Reply to Hegner Multimax-18 for sale Tucson
        by NC Scroller
        Good luck.
        Yesterday, 05:47 AM
      Working...
      X