Announcement

Collapse
No announcement yet.

Fire Fighter Plaque

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fire Fighter Plaque

    Finally got to this one;


  • #2
    It is gorgeous. You did an excellent job.

    Comment


    • #3
      Nice Job! That one is in my to cut list.
      "All it Takes For the Forces of EVIL to Rule Is For Enough GOOD People To DO NOTHING!"

      Saws: Excaliber 30; Dewalt 788 'Twins', Makita SJ401 (Retired), Grizzly G1012 18" Bandsaw

      Comment


      • #4
        I really like that but would prefer to have thw engine house number in the center, we have alot of them out here and when I finally get my scroll saw would like to do one for each engine house.Jerry

        Oh btw very nice cutting.
        Don't worry be scrolling

        Comment

        Unconfigured Ad Widget

        Collapse

        Latest Topics

        Collapse

        • NC Scroller
          Reply to Shrink wrap systems
          by NC Scroller
          My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
          Today, 07:42 AM
        • will8989
          Reply to Shrink wrap systems
          by will8989
          None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
          Today, 12:20 AM
        • Linda In Phoenix
          Reply to Shrink wrap systems
          by Linda In Phoenix
          What thickness of film seems to work the best for puzzles?
          The bags seem easier on the surface.
          But the film seems like it is more versatile on size variations.
          Yesterday, 03:24 PM
        • will8989
          Reply to Bruce, the one on probation
          by will8989
          Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
          Yesterday, 10:32 AM
        • Sandy Oaks
          Reply to Shrink wrap systems
          by Sandy Oaks
          As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
          Yesterday, 09:46 AM
        Working...
        X