Announcement

Collapse
No announcement yet.

Walnut Train Clock

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Walnut Train Clock

    Cut from 1/2 inch Black Walnut and finished with satin lacquer


    DW
    Attached Files
    Life is hard. It is even harder when you are being stupid.
    John Wayne

  • #2
    Nicely done...
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment


    • #3
      Nice looking project!
      God Bless! Spirithorse

      Comment


      • #4
        Looks good,I have a client who loves trains.Jerry
        Don't worry be scrolling

        Comment


        • #5
          Simply sweeeeeet DW, nice job on those pie shape cuts.
          Gloria ............... Two memorable things to say in life, "Hello" for the first time, and "Good-bye" for the last.

          Comment

          Unconfigured Ad Widget

          Collapse

          Latest Topics

          Collapse

          • Bill Wilson
            Reply to wipe on poly and tack cloth
            by Bill Wilson
            First, follow the instructions on the can, regarding wait time between coats. I would think that for the first couple coats, re-applying while the previous coat was still tacky wouldn't be terrible, but I would warn that building several coats without allowing proper drying time, will extend the overall,...
            Today, 08:50 AM
          • Don in Brooklin On
            Reply to wipe on poly and tack cloth
            by Don in Brooklin On
            I use wipe on poly quite often and I apply 2 thin coats before sanding with 220 or 320. I wipe with a lint free. Someone told me not to use tack cloth as you can leave behind a wee bit of beeswax witch could cause issues later on.

            I make sure that the surface is dry and not tacky before...
            Yesterday, 05:41 AM
          • dwssr2
            wipe on poly and tack cloth
            by dwssr2
            Question, when sanding polyurethane in between coats, using a tack cloth, is it ok to wipe on poly while the project seems tacky or should a person wait a few hours to let it dry?
            How necessary is it to sand between coats of polyurethane? I am sure people have a lot of different opinions and...
            04-24-2019, 05:58 PM
          • tgiro01
            Reply to Do you know what this Is?
            by tgiro01
            Betty asked: "Where does the responsibility of the maker of an item end and the responsibility of the purchaser begin? My sealife puzzle is purchased by older people due to its complexity but - if they leave it laying around and a child gets a part and chokes, is that my responsibility or theirs?"...
            04-24-2019, 12:20 PM
          • RJweb
            Reply to Do you know what this Is?
            by RJweb
            The problem now a days everyone is sue happy, no matter who’s at fault, RJ...
            04-24-2019, 10:03 AM
          Working...
          X