Announcement

Collapse
No announcement yet.

The jointer is jumping!! Making chain blanks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • The jointer is jumping!! Making chain blanks

    I got up the nerve to try it!! I used a 1 1/2 1 1/2 poplar that I've had sitting around. Was really excited because I thought they were a different size, but they were perfect!

    I forgot to take the camera out with me to take pictures of the process, but I took some afterward to kind of show you.

    It was a bit of a balancing act, but really not too bad. I also had help! My husband kind of pulled back on the guard to start me through. It was a little difficult to push it through and hold it straight.
    009.jpg

    Once I got started it would snug up nicely against the board and help keep it aligned.
    007.jpg

    It looked really strange about half way through and I didn't think it was going to work, but by the time I got to 1/2 inch it was a cross!!
    015.jpg

    I did gouge it a little on one side. But once I figured out the "touch" it came out pretty well.
    020.jpg

    And voila.... 1/2 inch rectangle cuts!! It didn't take too awfully long, about a half hour. Took little bits at a time. I think it would be fast if I did it again.
    023.jpg

    Just another "work around" for a problem!! Thanks for looking!!
    Cathy in NE

    "While we try to teach our children all about life, our children teach us what life is all about." - Anonymous

  • #2
    Good for you. Just please always be aware of where your fingers are in that procedure it will only take a millisecond for a tragic outcome. I know a push stick will be more difficult to control but i would not feel real comfortable having my fingers that close to the jointer cutters. Looking forward to some more WIP pics of your chain. Whoooo hoo...
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment


    • #3
      "Ho lee chit" Cathy you are one brave woman, so glad it worked out for ya. Just be careful, make yourself some push sticks or something. Looks like a sweeeeet sturdy machine.
      Now comes the fun to scroll that cross. Good luck.
      Gloria ............... Two memorable things to say in life, "Hello" for the first time, and "Good-bye" for the last.

      Comment


      • #4
        Thanks for worrying about me Mike and Wood Dog! The jointer was not running when I took the photos. I used my push blocks for a long time, but when I got a really big edge on it I did just use my hands, but very carefully. I know this is a dangerous machine. I still like it better than a table saw!!
        Cathy in NE

        "While we try to teach our children all about life, our children teach us what life is all about." - Anonymous

        Comment


        • #5
          Good for you. You have been paying attention on here....GRIN! Looking forward to those pics.
          "Still Montana Mike"

          "Don't worry about old age--it doesn't last that long."
          Mike's Wood-n-Things LLC

          Comment


          • #6
            It looks great. A nice solution, and my jointer will do this, so thanks again for the tip.
            Rolf
            RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
            Philosophy "I don't know that I can't, therefore I can"
            Proud Member of the Long Island Woodworkers Club
            And the Long Island Scrollsaw Association

            Comment


            • #7
              More power to you Cathy. The joiner and tablesaw are two tools in my shop I really respect. Not sure I would try what you did, but so glad it worked for you. So that was a chain blank you made?
              Hawaiilad
              Larry

              Comment

              Unconfigured Ad Widget

              Collapse

              Latest Topics

              Collapse

              • Jim McDonald
                Reply to Delta Q3 fuse question
                by Jim McDonald
                Twenty years in electronics retail and here is a quick dirty way to tell the difference:
                a fast blow will only have the wire element. Slow blow almost always has some extra structure that will be left behind after the fuse blows.
                Secondly, there is a series of three letter engraved on one...
                Yesterday, 08:54 PM
              • Ennobee
                Reply to Looking For Mom and Baby Animal Pattern
                by Ennobee
                They look like David Spielmann's Designs to me. I will check my library this evening, but I bet you already that they are from one of his pattern books.
                Yesterday, 01:55 PM
              • jim_mex
                Reply to My first decent furniture project - Welding and woodwork combined
                by jim_mex
                Thanks all - you folks do wonders for my ego with your comments and importantly fire me up to keep trying new things

                Scott - once this Covid situation has passed I'll definitely be heading up to NC. I'm tentatively thinking late spring/early summer next year. I am not sure just what pointers...
                Yesterday, 01:35 PM
              • JustLarry
                Reply to Delta Q3 fuse question
                by JustLarry
                I found this information on fuses in general.

                Blowing type. Fast-blow fuses will blow as soon as the current reaches the fuse's amperage rating, while slow-blow fuses are designed to tolerate a large number of startup surges and modest short-term overloads without blowing.
                Fast-blow...
                Yesterday, 12:56 PM
              • Rolf
                Reply to Giraffe sold at charity auction
                by Rolf
                WOW! That is exciting.
                Yesterday, 09:42 AM
              Working...
              X