Announcement

Collapse
No announcement yet.

Blade Recommendation Please!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blade Recommendation Please!

    For cutting bowls and baasket I use the Olson Single Tooth Precision Ground Tooth Blades They work well for cutting thick hardwood. I was thinking of trying the Flying Dutchman and I was wondering what is their equivalent to the PGTs


    Thanks

    Dave

  • #2
    Dave -- my "go to" blade is the #5 FD Polar Just cut a bowl from cherry. Don't know how it compares to the Olson but it is great on thick, hard woods.
    Mtnman Jim

    taking life as it comes and trying to make the best of it

    Comment


    • #3
      Email me, Dave.
      FD Mike
      SD Mike

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • will8989
        Reply to Shrink wrap systems
        by will8989
        None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
        Today, 12:20 AM
      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        What thickness of film seems to work the best for puzzles?
        The bags seem easier on the surface.
        But the film seems like it is more versatile on size variations.
        Yesterday, 03:24 PM
      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Yesterday, 10:32 AM
      • Sandy Oaks
        Reply to Shrink wrap systems
        by Sandy Oaks
        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
        Yesterday, 09:46 AM
      • NC Scroller
        Reply to Bruce, the one on probation
        by NC Scroller
        I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
        Yesterday, 07:42 AM
      Working...
      X