There are no conversations in this channel.
Please log in to your account to view your subscribed posts.
| Topics | Statistics | Last Post | |
|---|---|---|---|
|
27 responses
5,369 views
0 likes
|
by SteveK
07-09-2012, 02:53 PM
|
||
|
1 response
30 views
1 like
|
by Gary beasley
04-24-2018, 06:20 PM
|
||
|
12 responses
92 views
1 like
|
by mtwoodguy
04-22-2018, 09:10 AM
|
||
|
20 responses
124 views
1 like
|
by Sandy Oaks
04-20-2018, 09:47 AM
|
||
|
5 responses
66 views
1 like
|
by Sandy Oaks
04-12-2018, 11:52 AM
|
||
|
6 responses
125 views
2 likes
|
by billptol
04-03-2018, 04:17 PM
|
||
|
9 responses
117 views
1 like
|
by will8989
03-31-2018, 07:13 PM
|
||
|
8 responses
96 views
3 likes
|
by wjbclocks1
03-21-2018, 09:22 AM
|
||
|
8 responses
112 views
1 like
|
by DaveVanEss
03-10-2018, 11:49 PM
|
||
|
0 responses
35 views
1 like
|
by DaveVanEss
03-10-2018, 02:35 PM
|
||
|
4 responses
129 views
1 like
|
03-01-2018, 04:36 PM
|
No topics found.
-
-
Birch plywood 6mm
Here is video of making - shown all stages of process04-24-2018, 04:02 PM -
Thank you for the explainations.04-22-2018, 09:10 AM
-
I useed glue "88" of Ukrainian production, instruction: apply glue on both surfaces, wait about 10-15 minutes until the glue dries, squeeze the glued surfaces. Someone mention that In the USA similar glue calls "Contact Cement". About angles - I didnt measure angles, for 5 point...04-22-2018, 09:07 AM
-
Like I said, way beyond what I want to tackle.04-21-2018, 08:46 AM
-
Looking at the assembly jig drawings the angle should be 23 deg. or actually the reciprocal 67 deg....04-21-2018, 08:31 AM -
Jim, you are the master creative scroller! I can't imagine you having any problems.
04-21-2018, 08:16 AM -
Thanks Rolf - Yep I did think about that and I appreciate the comment. I´m going to experiment a little to see if I can stop the blade running away from me. My problem is turning the blade cleanly in those sharp corners. Alex makes it look so easy!...04-20-2018, 04:55 PM -
I agree with Gary, what glue are you using?04-20-2018, 04:08 PM
-
Very impressive! Any idea what angle you are sanding the glue faces to? I would oversize the ends past the cutline and set that angle on the scrollsaw and go back to cut to size. I would think it would make the fitting easier.
Also is that some kind of contact cement you are using on it?04-20-2018, 12:38 PM
