Problemm with Axminster AWSS-18

[Avalon]

Hello

Recently bought Axminster AWSS-18 works well, slowly cut out, but there is one problemma:
Beating sawing right / left about an inch.

The adjustments did not find you please tell how to fix it?

Best regards, Sergey.

[Fretnot]

Hi Sergey. I do not understand your question. If something is out of alignment an inch then you have a serious problem and must speak to the supplier. If you need advice from the forum can you be more specific and explain in more detail what the problem is and I am sure some of us will be able to help you.

[Avalon]

Wrote the message, but it does not appear in the answer.

Hello
I do not know English, and use online translator.
So you did not understand me.
Try different words.
On my machine goes not exactly nail.
There is a heartbeat, offset by the table to 1 inch or 2-3 mm left / right.

Here a similar problemma just walking back and forth sawing.

[Sunlion]

Sounds like you are not able to keep blade on track, that you are getting a slight drift of a few mm left or right, is this correct, even when trying to cut straight line from front to back yes?

You say heartbeat, do you mean a small amount? as in mm left/right?

[Avalon]

Sounds like you are not able to keep blade on track, that you are getting a slight drift of a few mm left or right, is this correct, even when trying to cut straight line from front to back yes?

You say heartbeat, do you mean a small amount? as in mm left/right?

No, not true.
The blade goes right / left idling.

Run the machine, sawing move left / right.

http://www.scrollsawer.com/forum/beginners-scroll-saw/41616.htm#post381529

Here, back and forth, I have a right to the left.

I began to saw out, everything is fine.

[Sunlion]

Ah I see, clearer now thanks. I can't help you I am afraid but at least it is clear now what is happeneing and someone with experience of these things may be able to help you out. Good luck,

Sunlion