No announcement yet.

Very first cut today yea

  • Filter
  • Time
  • Show
Clear All
new posts

  • Very first cut today yea

    Bought Delta ss350 last Friday. Cut out a motor mount for one of my rc airplane projects.
    I used 1/8 inch plywood and the blade that was on the saw.
    The motor mount is a 2 inch circle with a 1 inch circle
    cut out of the center of it..
    Did 3 so I figured I saved $6.00 from buying ready made.
    No they are not perfect, but was fun to do.
    I found this forum and really like what I see.
    My wife kinda wanted to do some scrolling so we both will
    be doing some suff.
    Untill next time

  • #2
    Welcome, dont be shy noob. DUH!!! Jump right in. Great to have ya aboard. Dale
    Dale w/ yella saws


    • #3
      Hi Deepguy, wellcome. great maybe we have another wife and hubby team. bet you both will do wonders. and of corse we wont to see everything. your new friend Evie
      Last edited by minowevie; 05-29-2006, 08:33 PM.


      • #4
        Welcome to the forum.
        I know you are going to love scrolling. Your RC projects may end up taking a back seat
        "proud member of the best scroll sawing forum on the net."
        Ryobi SC180VS scroll saw EX21


        • #5
          welcome from another noob....
          Pete Ripaldi

          "Insert Clever Tag Line Here..."


          Unconfigured Ad Widget


          Latest Topics


          • will8989
            Reply to My beauties
            by will8989
            He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
            Today, 10:55 AM
          • Rolf
            Reply to Cutting guide for straight cut on a scroolsaw
            by Rolf
            Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
            Today, 07:54 AM
          • Rolf
            Reply to My beauties
            by Rolf
            I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
            Today, 07:49 AM
          • NC Scroller
            Reply to My beauties
            by NC Scroller
            You are one busy lady. About how long does it take to cut one?
            Today, 05:51 AM
          • NC Scroller
            Reply to Hegner Multimax-18 for sale Tucson
            by NC Scroller
            Good luck.
            Today, 05:47 AM