Announcement

Collapse
No announcement yet.

Quick easy project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick easy project

    Here is a quick easy project for anyone to keep their valuable copies of Scroll Saw Workshop in order.

    I used a piece of 1/8 BB ply and cut it out in no time.
    Just slip the fob over the center page of the magazine and the patterns.
    Put it in a three ring binder and you are set.
    If you want to get creative, put a tab on the top so you can have the issue number handy.
    Attached Files
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

  • #2
    Very Clever. That would even keep the patterns in the SSW if you had taken them out.. Just cut the strips on the Table saw. Drill the holes, same holes for end of tabs then cut out the hole for inserting the SSW afterwards. Can make five or six at a time. I have a bunch of 1/8th inch stripes, long pieces I have been saving for paint stirrers. Very, very nice, on the top of the list for tomorrow!!!!!
    Chuck D


    When a work lifts your spirits and inspires bold and noble thoughts in you, do not look for any other standard to judge by: the work is good, the product of a master craftsman.
    Jean De La Bruyere...

    l
    Hegner 18, Delta p-20, Griz 14 inch Band saw

    Comment


    • #3
      i didnt have the 1/8th bb plywood, but did have an over abundance of 5 gallon buckets, the wife gets them from food service where she works,
      but with a jig saw mounted with a metal cutting blsde for close teeth, i made several bout 5 years ago for another hobbie and they are in great shape,
      guess you could use 3 leter pop bottles as well if you skinned them right, that plastic is about as tough as alligator hide..

      great idea carl
      thanks for sharing sometimes the answer to out problems is just out of hearing range.. HAW!

      thought i was being cheap, guess its called frugal?
      Dremel 1680 & Delta ss250 shopmaster

      Comment


      • #4
        That's a great idea, Carl ! I must make myself a bunch of those.

        Gill
        There is no opinion, however absurd, which men will not readily embrace as soon as they can be brought to the conviction that it is readily adopted.
        (Schopenhauer, Die Kunst Recht zu Behalten)

        Comment


        • #5
          So where is the pattern for that?

          Comment


          • #6
            Just for Grizz

            I couldnt resist Grizz.

            Better check the 3 ring hole spacing though.
            Attached Files
            CAЯL HIRD-RUTTEЯ
            "proud member of the best scroll sawing forum on the net."
            Ryobi SC180VS scroll saw EX21

            Comment


            • #7
              Ready Made Plan Holders

              Zip on down to the local office supply store and get some ready-made vinyl ones. Brand name 'Rogers'

              They are made by:

              Newell Office Products Co.
              2514 Fish Hatchery road
              Madison, WI 53713
              Bob from Northwest Florida

              Delta P20

              Comment


              • #8
                Well, just came in from making 24 of the holders. stack cut the holes 6 at a time after drilling. Think I may put some kind of finish on the wood. Not sure it is necessary, but cost nothing but time and got rid of a whole bunch of paint stirrers.
                Chuck D


                When a work lifts your spirits and inspires bold and noble thoughts in you, do not look for any other standard to judge by: the work is good, the product of a master craftsman.
                Jean De La Bruyere...

                l
                Hegner 18, Delta p-20, Griz 14 inch Band saw

                Comment


                • #9
                  Awesome Chuck!

                  Now you just need a 6 year SSW subscription!
                  CAЯL HIRD-RUTTEЯ
                  "proud member of the best scroll sawing forum on the net."
                  Ryobi SC180VS scroll saw EX21

                  Comment


                  • #10
                    Combine that 6 year subscription with a few more issues each year, then youve got a winner!!!!
                    Dale w/ yella saws

                    Comment


                    • #11
                      Originally posted by lucky788scroller
                      Combine that 6 year subscription with a few more issues each year, then youve got a winner!!!!
                      I understand that one.
                      I was just looking back at issue 1 and see that SSW has really come a long way.
                      I would never want more issues if the quality was to drop, I still like quality over quantity.

                      It must be hard to pick and choose projects that will appeal to everyone.
                      CAЯL HIRD-RUTTEЯ
                      "proud member of the best scroll sawing forum on the net."
                      Ryobi SC180VS scroll saw EX21

                      Comment

                      Unconfigured Ad Widget

                      Collapse

                      Latest Topics

                      Collapse

                      • will8989
                        Reply to Shrink wrap systems
                        by will8989
                        None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
                        Today, 12:20 AM
                      • Linda In Phoenix
                        Reply to Shrink wrap systems
                        by Linda In Phoenix
                        What thickness of film seems to work the best for puzzles?
                        The bags seem easier on the surface.
                        But the film seems like it is more versatile on size variations.
                        Yesterday, 03:24 PM
                      • will8989
                        Reply to Bruce, the one on probation
                        by will8989
                        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
                        Yesterday, 10:32 AM
                      • Sandy Oaks
                        Reply to Shrink wrap systems
                        by Sandy Oaks
                        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
                        Yesterday, 09:46 AM
                      • NC Scroller
                        Reply to Bruce, the one on probation
                        by NC Scroller
                        I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
                        Yesterday, 07:42 AM
                      Working...
                      X