Merci Rolf , I use Pegas blade but not that kind, interesting what they say about it.
I will try them.
Have a good day
planeur
Announcement
Collapse
No announcement yet.
Silver jewelry
Collapse
Unconfigured Ad Widget
Collapse
Latest Topics
Collapse
-
-
Reply to My beautiesby will8989Looks like glass with the sun shining through it....-
Channel: Works in Process
Today, 08:08 AM -
-
Reply to My beautiesby will8989He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
-
Channel: Works in Process
Yesterday, 10:55 AM -
-
by RolfLike Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....-
Channel: Tools and Blades
Yesterday, 07:54 AM -
-
Reply to My beautiesby RolfI now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
-
Channel: Works in Process
Yesterday, 07:49 AM -