Announcement

Collapse
No announcement yet.

dust bags

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dust bags

    Hi can any one tell me if those bags that mount under scroll saw tables or the stand doing any good and catching the dust from the saw?






    "A woman is like a tea Bag------- You can't tell how strong she is until you put her in hot water."
    sigpicDeb Adams [email protected]

  • #2
    The dust on the scroll saw is very fine, just like sanding dust. The bag would collect some but I really recommend using a vacuum. It keeps the saw clean as well as the surrounding area.
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • Sandy Oaks
      Teach - Learn
      by Sandy Oaks
      A modified Sue Mey pattern to fit 1" x 4" x 10" Hard Maple. Cut on the Pegas scroll saw using a Pegas #5 MGT blade. One side says "TEACH". Flip it over and the other side says "LEARN". After sanding, dipped in diluted Shellac, sanded again and another dipping. Comments...
      You do not have permission to view this gallery.
      This gallery has 2 photos.
      Today, 12:13 PM
    • Sandy Oaks
      Reply to First Project - Stretching Cat
      by Sandy Oaks
      Very well done, especially for your first. I too like the added detail.
      Today, 11:22 AM
    • Rolf
      Reply to Insertion of a marquetry pattern in a stained glass window
      by Rolf
      The end result is beautiful I really like that Hummingbird design....
      Today, 09:54 AM
    • Rolf
      Reply to Help with spray adhesive
      by Rolf
      I have used all sorts of methods for putting on patterns. The only time I put a pattern directly on the wood is on Intarsia as the shaping process removes it. I only use blue tape under the pattern on very small projects.

      I Use clear removable contact paper (shelf liner) on the wood and...
      Today, 09:51 AM
    • Rolf
      Reply to Sanding and calibration disk.
      by Rolf
      I agree about how it was advertised, but it is my own fault, I know better. Just for curiosity I may strip the paint off and see how true the plate is.

      The good thing is that while I had my saw blade off I cleaned it sprayed Crud cutter on it let it sit then wiped it off with a skotchbright...
      Today, 09:42 AM
    Working...
    X