Announcement

Collapse
No announcement yet.

Ornament display

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ornament display

    A customer asked me to make him some sort of piece that I can hang on the wall at christmas time to display the ornaments he bought last year.. Any suggestions or patterns??
    Michael.....Indy..........
    "Dream what to cut, Cut what you dream"
    On Facebook
    https://www.facebook.com/pages/Custo...g/177349793474

    "EX-21 is my saw for life"

  • #2
    How about a silhouette in the shape of a traditional Christmas tree? You can do an interlocking one that has 4 sides and can stand on your table or taller that will stand on the floor.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment


    • #3
      I made one a few years ago that sits on a table, has 4 sides and I use pegs to hold the ornaments, it holds 16 different ones, and you can adjust the size if you want to by making it bigger, also its on a turntable, as I find out people like to turn things. Edward
      http://www.scrollsawer.com/gallery/s...00&ppuser=6384

      Comment


      • #4
        I had a Santa Display rack in the Holiday 2007 issue of SSWC which would work for what you're looking for (I think). The back issue is available here:
        Scroll Saw Woodworking & Crafts Issue 29 Holiday 2007
        Kevin
        Scrollsaw Patterns Online
        Making holes in wood with an EX-30, Craftsman 16" VS, Dremel 1680 and 1671

        Comment

        Unconfigured Ad Widget

        Collapse

        Latest Topics

        Collapse

        • will8989
          Reply to Bruce, the one on probation
          by will8989
          Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
          Today, 10:32 AM
        • Sandy Oaks
          Reply to Shrink wrap systems
          by Sandy Oaks
          As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
          Today, 09:46 AM
        • NC Scroller
          Reply to Bruce, the one on probation
          by NC Scroller
          I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
          Today, 07:42 AM
        • NC Scroller
          Reply to Shrink wrap systems
          by NC Scroller
          I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

          To use the bags you will need a sealer. I have one very similar...
          Today, 07:39 AM
        • Linda In Phoenix
          Reply to Shrink wrap systems
          by Linda In Phoenix
          I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
          Yesterday, 10:01 PM
        Working...
        X