Announcement

Collapse
No announcement yet.

Creating Wordart using Word by Dave Danchuck

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mardan
    replied
    sounds easy will have to try using word

    Leave a comment:


  • Sally
    replied
    Thank you all for this discussion. I'm going to work with it.

    Leave a comment:


  • bubbantenn
    replied
    Well, I use Adobe Photoshop although I have Word. I just never knew about any of this, even in my program. Just goes to show that if you poke around long enough something is bound to happen.
    I've been playing around with my fonts, etc. ever since I read this thread and I am amazed what all I could do. Now I am going to have to play around with Word a bit more if I can figure out how to import it into other patterns like an open heart, for instance.
    Right now, though, I've got to go. Thanks for a very informative thread. It's great!

    Bubba

    Leave a comment:


  • treslakter
    replied
    Thank you Dave!

    I should have seen the light long ago - a friend of mine uses Word to get quick layout templates for calligraphy when she needs to turn out something in a hurry. But what is obvious is often the most difficult to see.

    Leave a comment:


  • reads2kids
    replied
    Now that I've been provided with the answer, it seems so obvious! Thanks for the help.
    Patty

    Leave a comment:


  • shadylady0447
    replied
    You can do it by using the Word Art tool. set the AV to very tight and do one word at a time...the letters will be joined....then you can move the entire word up or down in increments by using the control and the arrow keys. Another way to do it in Word is to just use the text tool and do one letter at a time....when you have all of your letters you can just grab each one and move it to the place you want it. I hope this has helped you.

    Leave a comment:


  • reads2kids
    replied
    I've done word art using Microsoft Word to make one line of print, but how do I do it If I want 2 lines stacked without underlining? I tried using line spacing but it only shows half of the letter. What I have been doing is printing everything out and then tracing over them on another page to get the spacing that I want. I would like to eliminate that step, as I am lazy Any ideas?
    Patty

    Leave a comment:


  • Back2Jake
    replied
    WARNING: Word Art can be VERY addicting!!!!

    I find them like puzzles, but more fun! Yesterday I was in sloth mode and ended up sitting at the computer most the day - creating word art patterns. I need to test cut a dozen of them now.... hope the weather gets warmer.

    I encourage you to create them, but be careful there's always MORE to say once you've started designing word art patterns!

    Take care
    Toni

    Leave a comment:


  • wood-n-things
    replied
    jap,
    Yes it is, using microsoft word.

    Leave a comment:


  • jap
    replied
    is this microsoftword? thank you

    Leave a comment:


  • breakie
    replied
    G'day Dave....

    Thanks for your tutorial....... I'll give it ago aginst other ways ----- always good to have 'different ways', eh !! Hehheh.

    ... Ray.

    Leave a comment:


  • Jim McDonald
    replied

    Leave a comment:


  • Ramjet
    replied
    Take a look at Steve Good's site at Scroll saw workshop . He has a piece on printing names .
    Roger

    Leave a comment:


  • sawdustus
    replied
    Kevin, thanks for the tutorial. I was really getting frustrated using Print Shop and Word doesn't come with a manual anymore. (I know, its online and printable but how do you refer back to a page you saw five pages ago without going nuts?) I have to try it later today for the word art I have been trying to make for a dear friend who retired last month.

    George

    Leave a comment:


  • Jediscroller
    started a topic Creating Wordart using Word by Dave Danchuck

    Creating Wordart using Word by Dave Danchuck

    Creating Word Art using Word

    by Dave Danchuk

    WORD TUTORIAL for beginners

    2 ways

    For flat letters all in one line:

    Choose your font and size and write your letters. Highlight all you've just written and right click on it. Choose the "Font" tab, then choose the "Character Spacing" tab. Under the Spacing category change "Normal" to "Condensed" then it says "By 1 pt", change that until your letters touch by either clicking on the down arrow , or typing in another number. (try between 5 and 6 for the Hobo font, more or less for others) Oh, make sure you're going the right way, and expanding the font. Take a look at it and see if it's the right spacing. Now to add a line at the top or bottom (if you've got spaces in between words, go to the "autoshapes" at the bottom and click on the "box" shape (or just print it off and grab a ruler and pencil) and make yourself a box to fit the letters on to. Right click on the box and under "Color and Lines", change the color to black and/or the "Style" to a good thickness. Click and hold one of the buttons of the box to move it to under (or over) the letters, so that everything in your phrase is connected.


    For rounded phrases/names:

    Click on the blue shadowy A at the bottom (or go to Insert-Picture-Word Art) I chose the one on the top left corner (you can bend it later.) Type in your name or phrase (hit enter after every new line you want (ie. first name <enter> last name). I like using capital letters, but there's a button for getting them all the same height. Bold is good but not necessary. Choose your font here as well, the NP Hobo Medium is what I've been playing with. Hit enter.

    There's your text with back outline of white letters, and a popup window or new bar at the top with some options. Play around with them, but here's a quick cheat sheet.

    Go to the "Edit Text" button. Under the "Color and lines" tab, change the fill color to black. Click okay. Looks familiar huh. Now to get the letters to touch each other, go to the button that says AV with arrows under it. Click "Very tight"

    So now you can bend stretch, and twist the letters. there's white boxes around the corners of your phrase, pull them around. There's also a yellow diamond, move this and see what happens. Now go to the "abc" button and play with those, the circle with the line through it is excellent for 3 lines of text, but try them all out. Also under the button with the horizontal lines, try the stretch justify button.

    You might want to have a separate "word Art" window for each line you want as you can more freely rotate and stretch them to fit together so that the pattern will be scrollable.

    To add the arrows and circles (or other assorted shapes that will connect all your pieces together) use the "Autoshapes" button or one of the other buttons to the right of that (bottom of the screen) Now when you add one of those, some of your font goes behind your new shape. Right click on your new shape, under the "order" heading, choose "send behind text.

    ...and there ya have it. Play around with it, be creative and have fun! You'll never need to buy a Wedding present again, I've scrolled quite a few, with the Bride and Grooms name and their wedding date below, and the response has been GREAT. (and that way the guys can see the date and never forget an anniversary, also a very good thing)



    Cheers,

    Dave

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Hobbyhorse
    Reply to Wallplanter revisited
    by Hobbyhorse
    The planter really does look great Jim. As for the tomato plants, a late night expedition with a jug of boiling water will leave no trace in the morning .... not that I would do such a thing.
    Today, 03:38 PM
  • jim_mex
    Wallplanter revisited
    by jim_mex
    Hi Folks - with lots of posts around regarding the COVID-19 situation I thought I'd post a non pandemic topic to hopefully brighten up the day a little.


    Back in January I posted a whimsical gardening post showing a wall planter I knocked up out of PVC plumbing fittings. This morning...
    Today, 02:46 PM
  • Ennobee
    Reply to 9- piece airplane
    by Ennobee
    In the meantime here bare some glamour shots of the finished plane, glued, sanded and waxed:...
    Today, 02:43 PM
  • Ennobee
    Reply to 9- piece airplane
    by Ennobee
    This evening when I get the computer back. It's currently claimed by my wife's company for work-from-home purposes.

    It will be only a one-page Gif image though.
    Today, 02:34 PM
  • BadBob
    Wood Toy Pickup
    by BadBob
    The latest in a long line of these little trucks....
    Today, 01:40 PM
Working...
X