Announcement

Collapse
No announcement yet.

Branches in low relief

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    Re: Branches in low relief

    Thanks Cap.

    Leave a comment:


  • Captain_Bandaid
    replied
    Re: Branches in low relief

    CarverDude, when I do vines and branches, I leave them flat topped and square sided until I get the grounding complete. I then take a small, detail knife and begin to cut the edges off, creating an irregular, rounded surface. Remember, branches and vines are not a nice round section. If you want to add more detail, use a woodburner set fairly low and burn lines parallel to the length of the branch or vine. Make them of varying length and spacing, making sure some of them twist over the top of the branch. Practice this on some scrap before you do it on your project. It's not that difficult.

    Leave a comment:


  • Guest's Avatar
    Guest started a topic Branches in low relief

    Branches in low relief

    Ok, I'm doing a grape vine in low relief, how ever, I need to know how to round onver the branches(they kinda twist and turn).

    Thanks all.

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Linda In Phoenix
    Reply to Blades
    by Linda In Phoenix
    My preference would be Flying Dutchman #5, as it could handle it if you needed some tighter turns---and going to a #7 or #9 if doing a lot of straighter cuts. Plywood does dull blades a bit faster though, no matter the blade brand choice. The best blade is kinda a broad question---every brand works...
    Today, 10:28 PM
  • Linda In Phoenix
    Reply to Blades
    by Linda In Phoenix
    I totally agree with Dan (dgman). I prefer Flying Dutchmans for most things, but I know others who absolutely swear by other top brands, and almost everyone go thumbs down on generics after trying the name brands---and the price difference is next to nothing if you know where to buy. Some suppliers...
    Today, 10:22 PM
  • dgman
    Reply to Blades
    by dgman
    Wow, that is a loaded question! You will get a lot of opinions, but the best answer is the ones that work for you. My suggestion is to order or buy several types and sizes and brands, and use what works for you. I would suggest you not buy the generic blades you find in local hardware stores. The top...
    Today, 09:52 PM
  • woodvender
    Blades
    by woodvender
    What are the sharpest smoothest cutting blades for scroll saws
    Today, 08:12 PM
  • Linda In Phoenix
    Reply to Giraffe Scene and Puzzle
    by Linda In Phoenix
    Cool mix of intarsia and puzzle! very nice
    Today, 05:00 PM
Working...
X