Announcement

Collapse
No announcement yet.

New members

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New members

    We seem to have a great number of new members as of late (enought that I'm struggling to keep up and welcome them all aboard. So I'm going to be a bit lazy (Hey...I've got deadlines approaching, so I've got to manage my time carefully), and welcome you all aboard en masse!

    Welcome! We've got a great group here, so if you have any questions, don't be afraid to shout out! And post some photos! We'd love to see what you're working on!!! And I know posting photos can be difficult when you first get going on this forum, so if you need help with that, give me a shout!

    Best regards,
    Bob Duncan
    Technical Editor
    www.GrobetUSA.com

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Linda In Phoenix
    Reply to Shrink wrap systems
    by Linda In Phoenix
    What thickness of film seems to work the best for puzzles?
    The bags seem easier on the surface.
    But the film seems like it is more versatile on size variations.
    Today, 03:24 PM
  • will8989
    Reply to Bruce, the one on probation
    by will8989
    Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
    Today, 10:32 AM
  • Sandy Oaks
    Reply to Shrink wrap systems
    by Sandy Oaks
    As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
    Today, 09:46 AM
  • NC Scroller
    Reply to Bruce, the one on probation
    by NC Scroller
    I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
    Today, 07:42 AM
  • NC Scroller
    Reply to Shrink wrap systems
    by NC Scroller
    I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

    To use the bags you will need a sealer. I have one very similar...
    Today, 07:39 AM
Working...
X