Announcement

Collapse
No announcement yet.

Grand Rapids, MI in need of some wood cutouts

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Grand Rapids, MI in need of some wood cutouts

    Hi
    I am looking for a wood cutter in Grand Rapids or Western Michigan to make a few detailed pine wood cut outs for some Christmas painting. They are table top size santas (designs by Pipka if you are familiar). I don't visit here often so please email me at
    [email protected]
    thanks
    Tags: None
  • #2
    There's a woodworking store on 27th st I think it is. Check your yellow pages, I can't remember the name of it but they have a big class room and lots of scrollers. There's also a new woodcraft store that is on 28th st which can also hook you up with someone I'm sure.
    Jeff Powell

    Comment

    Previous template Next

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse
    • will8989
      Reply to Bruce, the one on probation
      by will8989
      Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
      Today, 10:32 AM
    • Sandy Oaks
      Reply to Shrink wrap systems
      by Sandy Oaks
      As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
      Today, 09:46 AM
    • NC Scroller
      Reply to Bruce, the one on probation
      by NC Scroller
      I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
      Today, 07:42 AM
    • NC Scroller
      Reply to Shrink wrap systems
      by NC Scroller
      I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

      To use the bags you will need a sealer. I have one very similar...
      Today, 07:39 AM
    • Linda In Phoenix
      Reply to Shrink wrap systems
      by Linda In Phoenix
      I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
      Yesterday, 10:01 PM
    View All
    Working...
    X