Announcement

Collapse
No announcement yet.

Another Noob

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another Noob

    Gooday people,
    Just starting off scrolling. Making solid toys for children is my aim. Have made a few. A group of around 30 blokes are in the process of starting a Mens Shed here in Bordertown. Shed will be 30 feet by 80 feet - with plenty of room to double that if required. No woodworking clubs anywhere near and travelling is the main problem. Hooray for the internet.
    Will no doubt be asking lots of questions later when I get down to it.
    Have one now. Is JET a good drum sander - think the model is 16-32 ??? Suggested price ??
    Stationary.

  • #2
    Welcome to the group! Lots of good people here to answer questions and give helpful advice.

    I don't know squat about the Jet drum sander, but I'm sure someone will jump in and give an opinion.
    Dave
    "Tight's tight, too tight's broken"

    My Gallery

    Comment


    • #3
      Welcome A Board!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions. The only dumb question is the one that remains unasked.

      You may find the stickies at the top of this forum to be very helpful. Use the Link below.

      Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

      Take a few minutes to read through them. They are chock full of great information.

      Be sure and share pics of your projects. We thrive on pictures. You will find we are not a judgmental group.

      Whatever reason brought you to our forum we are pleased you found us.

      Take some time to read the bylaws of the forum. We do not allow open/direct selling on the forum.
      "Still Montana Mike"

      "Don't worry about old age--it doesn't last that long."
      Mike's Wood-n-Things LLC

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • Gary beasley
        Reply to Cutting guide for straight cut on a scroolsaw
        by Gary beasley
        Cutting a straight line I get it started then plant my thumb at the side of the piece and use that to stabilize the cutting path, a bit like the pin you would use on a bandsaw when resawing old style.
        Yesterday, 02:34 PM
      • will8989
        Wood supply
        by will8989
        We went to Groff & Groff yesterday. Purple Heart wood is stuck on a boat somewhere. They said imported exotic and hardwoods are stuck on boats. So if you see a wood you need, grab it while you can.
        Yesterday, 09:58 AM
      • will8989
        Reply to My beauties
        by will8989
        He has 4 of the long ones, but we have other sizes that he uses for clamping up his cheese board slicers, another good seller. They go for $35, left over wood from dough board. On late shift yesterday because I took a 2 hour nap around 7. Off to the saw! I have 8 days of shows in 2 weekends! And one...
        Yesterday, 09:49 AM
      • RJweb
        Reply to My beauties
        by RJweb
        The boards and baskets are beautiful, but maybe buy Bruce some more clamps, also I see you are on the night shift again, RJ...
        Yesterday, 09:28 AM
      • will8989
        Reply to My beauties
        by will8989
        What Carole said. The lips are 1 1/2”, holds the board to the counter and keeps the flour from going off the back. After gluing them to the board, he drilled stainless screws through the lip into the board and made plugs to fill the holes. The board is 3/4” thick. Since he only has 4 large Bessy...
        Yesterday, 01:20 AM
      Working...
      X