Announcement

Collapse
No announcement yet.

Greetings!!

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Greetings!!

    Hi everyone,
    Finally decided to join the forum. I have been scrolling and doing some other small woodworking for the last 15 years. I am currently on Oahu in the beautiful state of Hawaii. My wife and I will be moving to Ft Wayne, IN since our last daughter is graduating and all our kids will be on the CONUS and we are becoming empty nesters. Hope to do craft fairs and other stuff in Ft Wayne, and will try and get into some organizations there. Looking forward to meeting all of you on the forum!! Aloha!!
    Tags: None
  • #2
    You are willingly moving from paradise ti Indiana of all places..? Oh well....Family first..<grin>

    Welcome A Board!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions. The only dumb question is the one that remains unasked.

    You may find the stickies at the top of this forum to be very helpful. Use the Link below.

    Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

    Take a few minutes to read through them. They are chock full of great information.

    Be sure and share pics of your projects. We thrive on pictures. You will find we are not a judgmental group.

    Whatever reason brought you to our forum we are pleased you found us.

    Take some time to read the bylaws of the forum. We do not allow open/direct selling on the forum.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment

    • #3
      Greetings from a place much colder than Hawaii.
      Check me out on the web:
      http://www.kerrysworld.com

      Comment

      • #4
        Welcome to the forum Walt! Glad you've found us....
        Frieke
        www.friewoodart.webs.com

        Visit Frieke's gallery

        Don't let the pain of your past and the fear of your future ruin the happiness of your present.

        Comment

        • #5
          Hi Walt - Welcome to the forum. Dive in at the deep end and splash around and you won't go far wrong.

          Please post examples of your work. As Mike says, we are not judgmental but we do like to see what other scrollers are producing whatever the type of scroll work and skill level.
          Jim in Mexico

          Logic will get you from A to B. Imagination will take you everywhere.
          - Albert Einstein

          Comment

          • #6
            Welcome "a-board" Walt, nice to have new members, another brain to pick.
            Yep we sure do love to see project photos, not mandatory to post them, but sure appreciated.
            Come by often, the more the merrier.
            Gloria ............... Two memorable things to say in life, "Hello" for the first time, and "Good-bye" for the last.

            Comment

            Previous template Next

            Unconfigured Ad Widget

            Collapse

            Latest Topics

            Collapse
            • Gary beasley
              Reply to Cutting guide for straight cut on a scroolsaw
              by Gary beasley
              Cutting a straight line I get it started then plant my thumb at the side of the piece and use that to stabilize the cutting path, a bit like the pin you would use on a bandsaw when resawing old style.
              Yesterday, 02:34 PM
            • will8989
              Wood supply
              by will8989
              We went to Groff & Groff yesterday. Purple Heart wood is stuck on a boat somewhere. They said imported exotic and hardwoods are stuck on boats. So if you see a wood you need, grab it while you can.
              Yesterday, 09:58 AM
            • will8989
              Reply to My beauties
              by will8989
              He has 4 of the long ones, but we have other sizes that he uses for clamping up his cheese board slicers, another good seller. They go for $35, left over wood from dough board. On late shift yesterday because I took a 2 hour nap around 7. Off to the saw! I have 8 days of shows in 2 weekends! And one...
              Yesterday, 09:49 AM
            • RJweb
              Reply to My beauties
              by RJweb
              The boards and baskets are beautiful, but maybe buy Bruce some more clamps, also I see you are on the night shift again, RJ...
              Yesterday, 09:28 AM
            • will8989
              Reply to My beauties
              by will8989
              What Carole said. The lips are 1 1/2”, holds the board to the counter and keeps the flour from going off the back. After gluing them to the board, he drilled stainless screws through the lip into the board and made plugs to fill the holes. The board is 3/4” thick. Since he only has 4 large Bessy...
              Yesterday, 01:20 AM
            View All
            Working...
            X