Announcement

Collapse
No announcement yet.

looking to scroll

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • looking to scroll

    I have recently retired and have just finished building a wood shop.
    I am now furnishing it with machines and looking for a good used scroll saw.
    Any info would be appreciated.

  • #2
    Welcome A Board!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions. The only dumb question is the one that remains unasked.

    You may find the stickies at the top of this forum to be very helpful. Use the Link below.

    Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

    Take a few minutes to read through them. They are chock full of great information.

    Be sure and share pics of your projects. We thrive on pictures. You will find we are not a judgmental group.

    Whatever reason brought you to our forum we are pleased you found us.

    Take some time to read the bylaws of the forum. We do not allow open/direct selling on the forum.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • Jim Lowder
      Reply to Question about tilting head saws
      by Jim Lowder
      Thank you everyone. I guess I just need to scroll more and have more patience with my abilities. You all are amazing...
      Yesterday, 08:08 PM
    • evilbadger
      Reply to Cutting Air
      by evilbadger
      How thick is that foam Randy? That turned out really nice.

      The view on the house is nice but that 11 foot 3 ceiling height is killing me....
      Yesterday, 07:56 PM
    • Rolf
      Reply to Question about tilting head saws
      by Rolf
      I have both types of saw A tilting table Hawk g426 and an Older Excalibur with a tilting head. Unlike Carole for bevel cuts I prefer the tilting head I do larger projects and it is easier for me.
      Regarding compound cuts they are cut at 90 degrees.

      If I were in the market for a new...
      Yesterday, 05:38 PM
    • handibunny
      Reply to Question about tilting head saws
      by handibunny
      If you have a good saw, and can set the table accurately, you should be good to go. Give a holler if you need help. ๐Ÿ˜

      Randy, I swapped out the clamps on the Jet for the Pegas clamps as soon as they became available. I found the Jet clamps just too fidgety for my taste.
      Yesterday, 05:09 PM
    • Jim Lowder
      Reply to Question about tilting head saws
      by Jim Lowder
      Thank you all for the info. Sounds like itโ€™s talent or practice issue not my saws. Wife already gave permission to buy a new one. I will wait tho
      Yesterday, 04:51 PM
    Working...
    X