Announcement

Collapse
No announcement yet.

Even voorstellen

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Even voorstellen

    Hallo mijn naam is Anno Bonjernoor,ik ben 64 jaar.
    Wij wonen in Voorst(Gem.Voorst).
    Ik ben met de VUT,maar heb nog wel een volledige baan erbij.
    Met het zagen moet ik nog beginnen maar ik wil me eerst terdege orienteren.
    Mede voor de aanschaf van de diverse attributen en gereedschappen etc.

  • #2
    Hallo Anno en welkom op de een geweldige site. Ik weet zeker dat u zult genieten van wat andere scrollers te bieden hebben. Deel uw ervaring en foto's met ons wanneer je tijd hebt.
    Dan H

    I would rather be friendly to a stranger than be a stranger to my friends.

    Comment


    • #3
      Hi Anno,
      Welcome to a great site.
      You can always go to a translating site to go from Dutch to English.
      Even presenting -------------------------------------------------------------------------------- Hello my name is Anno Bonjernoor, I am 64 years. We live first (Gem.Voorst). I am with the early retirement, but have still a complete job. With saw I must start still but I want orient myself firstly properly. For the purchase of the several attributes and tools etc.
      I was born in Uithuizermeeden, Gron. Go to my web site to find out more about it.
      FD Mike
      SD Mike

      Comment


      • #4
        Welkom bij Baptist[email protected]
        Amuseer je hier en als je vragen hebt, stel ze dan maar. Er zal altijd iemand zijn die je kan helpen!

        Hi Anno, and welcome here. It's good to meet you here, I'm from Belgium... Most of the peoples here speaks english, you can always Google translator. Do you know what kind of scrollsaw you want? At Welkom bij Baptist you'll find a lot... You can always mail me in dutch. Have fun and when you have questions, just ask them, there's always someone to help you out!
        Frieke
        www.friewoodart.webs.com

        Visit Frieke's gallery

        Don't let the pain of your past and the fear of your future ruin the happiness of your present.

        Comment


        • #5
          Welcome A Board!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions.

          You may find the stickies at the top of this forum to be very helpful. Use the Link below.

          Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

          Take a few minutes to read through them. They are chock full of great information.

          Be sure and share pics of your projects. We thrive on pictures.

          The only dumb question is the one that remains unasked.

          Whatever reason brought you to our forum we are pleased you found us.

          Take some time to read the bylaws of the forum. We do not allow open/direct selling on the forum.
          "Still Montana Mike"

          "Don't worry about old age--it doesn't last that long."
          Mike's Wood-n-Things LLC

          Comment

          Unconfigured Ad Widget

          Collapse

          Latest Topics

          Collapse

          • will8989
            Reply to Shrink wrap systems
            by will8989
            None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
            Today, 12:20 AM
          • Linda In Phoenix
            Reply to Shrink wrap systems
            by Linda In Phoenix
            What thickness of film seems to work the best for puzzles?
            The bags seem easier on the surface.
            But the film seems like it is more versatile on size variations.
            Yesterday, 03:24 PM
          • will8989
            Reply to Bruce, the one on probation
            by will8989
            Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
            Yesterday, 10:32 AM
          • Sandy Oaks
            Reply to Shrink wrap systems
            by Sandy Oaks
            As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
            Yesterday, 09:46 AM
          • NC Scroller
            Reply to Bruce, the one on probation
            by NC Scroller
            I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
            Yesterday, 07:42 AM
          Working...
          X