Announcement

Collapse
No announcement yet.

hello

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hello

    Good day to all fellow woodworkers guys and gals alike.

    I have been a scrollsawer for many years now and thought i might join in the community for a change.

  • #2
    Welcome A Board!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions.

    You may find the stickies at the top of this forum to be very helpful. Use the Link below.

    Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

    Take a few minutes to read through them. They are chock full of great information.

    Be sure and share pics of your projects. We thrive on pictures.

    The only dumb question is the one that remains unasked.

    Whatever reason brought you to our forum we are pleased you found us.

    Take some time to read the bylaws of the forum. We do not allow open/direct selling on the forum.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment


    • #3
      Welcome aboard Theloneranger !
      Let us know a little about yourself where you live and maybe a 1st name and also we like pictures.
      Keep Scrolling !
      Eric

      Liberty Twp (Cincinnati), OH

      If today were perfect, there would be no need for tomorrow!

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • NC Scroller
        Reply to Shrink wrap systems
        by NC Scroller
        My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
        Today, 07:42 AM
      • will8989
        Reply to Shrink wrap systems
        by will8989
        None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
        Today, 12:20 AM
      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        What thickness of film seems to work the best for puzzles?
        The bags seem easier on the surface.
        But the film seems like it is more versatile on size variations.
        Yesterday, 03:24 PM
      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Yesterday, 10:32 AM
      • Sandy Oaks
        Reply to Shrink wrap systems
        by Sandy Oaks
        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
        Yesterday, 09:46 AM
      Working...
      X