Announcement

Collapse
No announcement yet.

newbie

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • newbie

    hello folks....new here....just wanted to say hi....I'm trying to do all this on an android..so bare with me....

  • #2
    Welcome A Board!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions.

    You may find the stickies at the top of this forum to be very helpful. Use the Link below.

    Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

    Take a few minutes to read through them. They are chock full of great information.

    Be sure and share pics of your projects. We thrive on pictures.

    The only dumb question is the one that remains unasked.

    Whatever reason brought you to our forum we are pleased you found us.

    Take some time to read the bylaws of the forum. We do not allow open/direct selling on the forum.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • Linda In Phoenix
      Reply to Shrink wrap systems
      by Linda In Phoenix
      What thickness of film seems to work the best for puzzles?
      The bags seem easier on the surface.
      But the film seems like it is more versatile on size variations.
      Today, 03:24 PM
    • will8989
      Reply to Bruce, the one on probation
      by will8989
      Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
      Today, 10:32 AM
    • Sandy Oaks
      Reply to Shrink wrap systems
      by Sandy Oaks
      As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
      Today, 09:46 AM
    • NC Scroller
      Reply to Bruce, the one on probation
      by NC Scroller
      I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
      Today, 07:42 AM
    • NC Scroller
      Reply to Shrink wrap systems
      by NC Scroller
      I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

      To use the bags you will need a sealer. I have one very similar...
      Today, 07:39 AM
    Working...
    X