Announcement

Collapse
No announcement yet.

Couple of projects to introduce myself :)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Couple of projects to introduce myself :)

    Hello

    My name is Marcin and I'm quite new to scroll sawing.
    Here are couple of my latest projects:

    1. Plunder Island Feral Chicken MagnetDesign based on Plunder Island Feral Chicken - Monkey Island wiki from The Curse of Monkey Island - Monkey Island wiki
    Cut on a Proxxon DSH Scroll Saw and hand painted
    Made from Okume Plywood.
    Inside the chicken there is a strong magnet. On the back of the chicken I glued a felt pad to protect the fridge from scratching.
    If you would like to cut your own here is a pattern: Feral chicken
    More photos: Plunder Island Feral Chicken Magnet | DwarfsForge

    2. Moustache Fridge Hanger

    Made from Okume Plywood.
    Inside the hanger there are two strong magnets. On the back of the hanger I glued two felt pads to protect the fridge from scratching.
    If you would like to cut your own here is a pattern: Mustache pattern
    More photos: Moustache Fridge Hanger | DwarfsForge

    3. Beneath a Steel Sky Pendant

    Design based on Beneath a Steel Sky - Wikipedia, the free encyclopedia game.
    Made from aluminium
    Size: 42 x 46 mm
    If anyone is interested I can also provide a pattern for this one.

    I moved your thread to a more appropriate forum to maximize traffic and get you more responses to your post.
    Last edited by m2grzegorczyk; 11-21-2011, 11:55 AM.

  • #2
    Welcome A Board!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions.

    You may find the stickies at the top of this forum to be very helpful. Use the Link below.

    Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

    Take a few minutes to read through them. They are chock full of great information.

    Be sure and share pics of your projects. We thrive on pictures.

    The only dumb question is the one that remains unasked.

    Whatever reason brought you to our forum we are pleased you found us.

    Take some time to read the bylaws of the forum. We do not allow open/direct selling on the forum.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • Rolf
      New Toy!
      by Rolf
      A family friends father passed away and he was an avid bird carver. So my nephew is helping the family sell some of his tools. I bought this air cleaner and will b uy most of his carving knives and burrs. And no that is not my workshop! Not even close. ...
      Today, 04:47 PM
    • Rolf
      Reply to EX dust collection holes screwed up a project.!
      by Rolf
      I just did a quick job on my table. Charles Hand has noticed that the adhesive on the new rolls of Contact brand shelf paper leaves a residue. He has changed to The duck brand. I just bought a roll and covered my table with it. It is a tough slick surface. It will be interesting to see how it holds...
      Today, 04:44 PM
    • axor
      Reply to Shawl pins
      by axor

      Yes, they can be used for hair. If they are made a little larger than the original, the shawl pins will work great in the hair!...
      Today, 03:21 PM
    • handibunny
      Reply to EX dust collection holes screwed up a project.!
      by handibunny
      Rolf, smaller bowl-cutting angles, 30˚ or less, usually don't present a problem either with vibration or for cutting into the table. It's when you get into the 40˚ and 45˚ range that things get dicey for both. (The Seyco saw doesn't even cut bevels greater than 35˚ or so!) If you add even a slight...
      Today, 09:21 AM
    • Bill Wilson
      Reply to EX dust collection holes screwed up a project.!
      by Bill Wilson
      I've done some bevel cutting on my EX-21 as well and also have not experienced any added vibration, nor have I cut into the table. Perhaps I haven't cut at a steep enough angle, but the existing blade hole has been sufficient. I do despise the useless vacuum holes, but I've learned to live with them...
      Today, 09:06 AM
    Working...
    X