Announcement

Collapse
No announcement yet.

looking for a cheerleader pattern

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • looking for a cheerleader pattern

    If anyone has any cheerleader patterns my daughter keeps asking me to make something for her and I can't locate one anywhere. Thanks
    Last edited by pat; 07-23-2006, 08:16 PM.

  • #2
    You could try looking through clipart files.
    Use google image search, or check out clipart disks from almost any graphic program.

    I have attached a clipart piece from Microsoft.
    This is not an actual pattern but it is a good starting point.
    Attached Files
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • NC Scroller
      Reply to Shrink wrap systems
      by NC Scroller
      My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
      Today, 07:42 AM
    • will8989
      Reply to Shrink wrap systems
      by will8989
      None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
      Today, 12:20 AM
    • Linda In Phoenix
      Reply to Shrink wrap systems
      by Linda In Phoenix
      What thickness of film seems to work the best for puzzles?
      The bags seem easier on the surface.
      But the film seems like it is more versatile on size variations.
      Yesterday, 03:24 PM
    • will8989
      Reply to Bruce, the one on probation
      by will8989
      Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
      Yesterday, 10:32 AM
    • Sandy Oaks
      Reply to Shrink wrap systems
      by Sandy Oaks
      As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
      Yesterday, 09:46 AM
    Working...
    X