Announcement

Collapse
No announcement yet.

Fire Dept Pattern

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fire Dept Pattern

    I was wondering if anyone could tell me where I can find some fire dept. patterns

  • #2
    new member

    Hello everyone, I'm John and I just got my new Dw 788 last night, I can't wait to start scrolling. I do have a question about what I've been hearing on the table top being off, Can anyone tell me more about what I should be looking for? Thanks

    Comment


    • #3
      Hi John,

      I moved your posts to your own thread so you can get better answers.

      The fire dept patterns you will likely find in one of the two Free scrollsaw pattern group http://groups.msn.com/AbsolutelyFreeScrollsawPatterns/ or http://groups.msn.com/FreeScrollsawP...Patterns&pps=k

      Look in the archive or ask. I'm sure I've seen one before.

      As for the DW788. use a straight edge and see if your top is flat. The problem is noticed around the hole where the blade passes through the table. It seems that the punching of the hole causes a slight distortion (dimple or bump effect).

      And welcome to the group, hope to see some of your efforts at making sawdust soon.

      Regards,
      Marcel
      http://marleb.com
      DW788. -Have fun in the shop or it isn't a hobby anymore.

      NOTE: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.

      Comment


      • #4
        Thanks

        Thanks so much for the answer, I'm going to be doing a lot of playing around this weekend to get use to the new saw.

        Comment


        • #5
          check wildwood designs, wooden teddy bear, scroller ltd. they all carry fireman patterns too. check links on the left side of this page. Dale
          Dale w/ yella saws

          Comment


          • #6
            sorry.... lay a straightedge across your table, it should be flat, or reasonably flat. If much more then a couple sheets of paper slips tween the table and straight edge, you should contact their customer support folks. Dale
            Dale w/ yella saws

            Comment


            • #7
              Originally posted by jpfire59
              I was wondering if anyone could tell me where I can find some fire dept. patterns
              Hi JP I can see buy your name , that you must be a firemon. and to start, I wont you to know , you guys are some of my most favorite and loved heroes. living in calif. we have lots and lots of fires. and I just don't know what we would do without you. and I will take this oppertunity to thank you for all you do for us. I tryed to give you a link to some free scrollsaw pattern places, but i get shut off. so maybe Marcel can put it up for you. I bet you can go there and ask them what you wont to cut and someone will make a pattern for you. but in the mean time here is some cataloges of patterns you can get for free. in the mail. Scroller www.scrolleronlins.com andThe Winfield Collection www..winfieldcollection.com and Meisel www.meiselwoodhobby.com and Wildwood Designs www.wildwooddesigns.com hope this helps, and glad you are here. your friend Evie ps can you do somthing about the heat here. Im burning up. LOL
              Edit. woops i see Marcel already did.
              Last edited by minowevie; 07-02-2006, 05:02 PM.

              Comment


              • #8
                Evie meant to post this... http://www.scrollerltd.com/ for Scroller, not the one she did.
                (I got your back girl!!!)
                Dale w/ yella saws

                Comment


                • #9
                  Thanks Dale your right. your friend Evie do you have a cherry tree for him.

                  Comment


                  • #10
                    that evie?

                    http://www.cherrytreetoys.com/
                    Dale w/ yella saws

                    Comment

                    Unconfigured Ad Widget

                    Collapse

                    Latest Topics

                    Collapse

                    • Quartz43
                      Reply to Tough Decisions
                      by Quartz43
                      I understand supporting the magazine and agree. I just do not find many projects that fit my desires.

                      I would like to see them do a poll with subscribers to find out what type projects people want to see....
                      Today, 05:42 AM
                    • GladeFade
                      Reply to My covid angel
                      by GladeFade
                      First off how thick is the board you cut?
                      When I want something to stand out I use backer-boards 1/8 thick to get the depth.
                      that means you would have to cut the big cutting into pieces to put the spacer behind.
                      for instance the cloud bottom right which his hand is on I would put maybe...
                      Yesterday, 11:05 PM
                    • Linda In Phoenix
                      Reply to Wooden Headstone
                      by Linda In Phoenix
                      I am stunned at the fact it wasn't rotted or termite destroyed. That must've been one blessed lady. Thank you for what you all are doing!
                      Yesterday, 10:43 PM
                    • Linda In Phoenix
                      Reply to Hard Woods for low $$$
                      by Linda In Phoenix
                      Pretty boards. Our Walmart didn't have any when I went. Thank you for sharing though.
                      Yesterday, 10:41 PM
                    • Linda In Phoenix
                      Reply to My covid angel
                      by Linda In Phoenix
                      Looking at the image, I would sand down the clouds a bit on the left (as you're looking at it)....to make it look like the clouds on the right are the closest to you. Then with the clouds to the left being less pronounced it will make it look more like he is sitting on them. Humorous design choice...
                      Yesterday, 10:40 PM
                    Working...
                    X