Announcement

Collapse
No announcement yet.

Hello all.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello all.

    Just wanted to introduce myself. I signed up a little while a go but haven't posted anything before as I always get sidetracked with all the useful tips that answer most of my questions.I already know where to go if (by "if" I really mean when) I need help. I plan to start a new project soon.Right now I am not sure what that will be as I have a couple of ideas in mind. When I figure that out I will let you know as well as you will be among the first to see the completed project. Thanks in advance Derek
    Derek

  • #2
    Originally posted by navysawer
    Just wanted to introduce myself. I signed up a little while a go but haven't posted anything before as I always get sidetracked with all the useful tips that answer most of my questions.I already know where to go if (by "if" I really mean when) I need help. I plan to start a new project soon.Right now I am not sure what that will be as I have a couple of ideas in mind. When I figure that out I will let you know as well as you will be among the first to see the completed project. Thanks in advance Derek
    Ok Derek, now you have gone and done it. lol. you have posted now. and we wont to see. Welcome , we don't cair what you are doing. (well maybe alittle). lol. but so glad you are here. and its not just about what you wont. gosh , we could learn from you too. what kind of things Do you like. in scrolling. fretwork, intasia. magretory, is that a word? we so love to get to know you. you don't have to show what you are doing. just join in. we are so pleased to have you. your friend Evie Ps your new project. ? what is it. we would love to know what that is. Navysawer. are you in the Navy. we have lots of Navy guys here.

    Comment


    • #3
      Welcome, Derek.
      You will have a great time scrolling and participating in the discussions here. It is a friendly family, and scrolling is soooo addictive - we always like to welcome a new addict. So. ask away, or just tell us a little (or a lot) about yourself, your saw, and the projects you think you'd like to try.
      Again, welcome!
      Sandy

      Comment


      • #4
        Welcome to the group Derek


        Charlie,
        Charlie
        "Everything Happens for a Reason"
        Craftsman 18in. 21609

        http://wolfmooncreations.weebly.com

        Comment


        • #5
          Welcome Derek. Up in your neck of the woods is a great scrolling designer/painter, Sheila Bergner-Landy. Look up her site online toysintheattic.com . Nice to meet ya. Dale
          Dale w/ yella saws

          Comment


          • #6
            Welcome Derek

            Hi Derek,

            Welcome to the group. We are a little more than just about scrolling. We like to share, discuss, disagree politely, kid each other, and have fun.

            Feel free to put in your .02 wherever or whenever, and remember that the only stupid question is the one not asked.

            Exchange is the key to learning.

            Regards,
            Marcel
            http://marleb.com
            DW788. -Have fun in the shop or it isn't a hobby anymore.

            NOTE: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.

            Comment


            • #7
              Welcome to the group Derek.
              Smitty
              Dewalt 788

              Comment


              • #8
                newcomer

                Welcome Derek. You are now an official member of the SAG. Scrollers addict group lol. have fun scrolling Toby

                Comment


                • #9
                  Thanks

                  Thanks for the replies. i am sorry to take so long to get the chance to reply again. I am in the navy since you asked.lol. Keeps me busy at times. Anyhow,I must go browsing.Just wanted to say thanks.
                  Derek

                  Comment

                  Unconfigured Ad Widget

                  Collapse

                  Latest Topics

                  Collapse

                  • tgiro01
                    Reply to I admit it... I splurged on a new "toy"
                    by tgiro01
                    One issue I found with the insert that comes with the saw was the areas they smoothed for the kickback pawls. If the insert is leveled correctly, those areas are sitting about 1/32-inch below the table. I had a problem with some small pieces getting caught and jamming because of that. Sawstop's recommendation...
                    Today, 08:18 AM
                  • Rolf
                    Reply to Interesting pallet
                    by Rolf
                    That is a definit rescue for a special project. I rarely get or use any pallet wood. But did use some from the pallet that my drill press was on. It looked like pine but was was very hard, carefully checked for nails and ran it through the drum sander with some 80 grit to get rid of any small grit.
                    Today, 08:16 AM
                  • Quartz43
                    Reply to Carved Fretwork Pumpkin
                    by Quartz43
                    I wish I could post the video as it looks better with the lights blinking. I used some red clear plastic behind the eyes and nose. It was a fun project.
                    Yesterday, 07:29 PM
                  • Linda In Phoenix
                    Reply to Interesting pallet
                    by Linda In Phoenix
                    Maybe a star shining to tell us something? That piece of wood is a very special piece! Good eye.
                    Yesterday, 07:27 PM
                  • Misouri Wayne
                    Reply to Bruce, the one on probation
                    by Misouri Wayne
                    Tough situation. Just have to take it one day at a time.
                    Yesterday, 04:55 PM
                  Working...
                  X