Announcement

Collapse
No announcement yet.

hi , im new to this group.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hi , im new to this group.

    hi , I'm new to this group. been trying to get on for a month now. love this magazine.
    My Name is Evie. I also made an album. hope you all go see , and give me your input. good or bad , I would love to here from you. I have been scrolling for 2 years , seriously for the last 1 year. I just love this art. an I have my herows. I learn alot from this magazine. there is no one in my area that i know of that even knows what fretwork is . so the only contacke i have is you. I enjoy the groups i have found on the internet. and have learned alot from all of you. please share all you know hahah. for i will suck it up. for i am possed. I don't make patterns for there is just too many out there to cut for now. and i just don't have the time in my life to complete the ones i love to cut. hope to meet some of you along the way.also i looked in your albums , an wonted to coment on all the ones i thought was great , BUT gosh there is just too many to respond too.. you are all great. hope to be as good as you all some day. hard to keep this short . just give me the time and i will take it all hahaha. your new friend Evie

  • #2
    Evie, welcome hun. I think we may have met already.
    Dale w/ yella saws

    Comment


    • #3
      Welcome to my friend Evie,
      This is a site with great people; who have a lot of knowledge about scroll sawing.
      Mike M
      SD Mike

      Comment


      • #4
        Welcome Evie

        Hi Evie..I just finished looking at your album. You might be new to this site but you are certainly not new to scrolling!!! Beautiful work!! Thanks for sharing. I look forward to seeing you around the board and seeing more of your work!!
        If it don't fit, don't force it....get a bigger hammer!!

        Comment


        • #5
          Hi evie,

          I have seen you on some other boards. Welcome
          "Still Montana Mike"

          "Don't worry about old age--it doesn't last that long."
          Mike's Wood-n-Things LLC

          Comment


          • #6
            One of the things that is wonderful about this board is we were all new here at one time or another.
            This forum is a community to itself and is always expanding.
            We have people from all over the world here with all levels of experiences in every aspect of scrolling, from pattern design to finishing.
            Think of the forum as joining a caravan we will journey all over the scrolling word collecting experiences from every stop.
            It looks like you have lots of scrolling experience to share with us.
            Welcome and enjoy the ride.
            CAЯL HIRD-RUTTEЯ
            "proud member of the best scroll sawing forum on the net."
            Ryobi SC180VS scroll saw EX21

            Comment


            • #7
              Hi Evie,
              Thanks for sharing your pictures, some beautiful work. I especially like your album covers.....and the tray.....and several of your clocks....well you get the idea!!!

              I've just started scrolling, and have learned much from this forum as well as from their magazine. Pretty much learning on my own and enjoying every minute of it.

              Welcome to the forum, I look forward to seeing more of your work,

              Ozarkhillbilly
              Bill
              Bill

              DeWalt 788



              aut viam inveniam aut faciam

              God gives us only what we can handle.. Apparently God thinks I am one tough cookie.....

              Comment


              • #8
                Gosh.... what a warm wellcome , thank you all for your kind words. its all been worth the time.I love fretwork. can you tell. i'm possed. hahah. love the messages. an look forward to getting to know you all. thanks again your new friend Evie

                Comment


                • #9
                  A belated but sincere welcome from the unfrozen north. Your work is absolutely fantastic!
                  ‎"Orphans are easier to ignore before you know their names. They're easier to ignore before you see their faces. It's easier to pretend they're not real before you hold them in your arms. But once you do, everything changes."

                  D. Platt

                  Comment

                  Unconfigured Ad Widget

                  Collapse

                  Latest Topics

                  Collapse

                  • Ennobee
                    Celtic knot-shamrock cross
                    by Ennobee
                    My wife fell in love with the shamrock cross pattern in the spring issue of SS&W. So I had to make her one as soon as I found the time. Off course, not being able to leave a good pattern alone, I decided to turn it into a segmentation using some real hard broken pallet wood I 'disposed off' at work....
                    You do not have permission to view this gallery.
                    This gallery has 1 photos.
                    Yesterday, 02:11 PM
                  • Ennobee
                    Reply to I've been AWOL for too long...
                    by Ennobee
                    Hi Jim.
                    glad to hear back from you. I have been absent almost just as long, but that was just because my 9-5 morphed into a 12-hour a day job due to... Something with the economy I guess. So yes. Good luck with your house. How come I have the feeling that after all this work you'll end up living...
                    Yesterday, 01:30 PM
                  • hotshot
                    Reply to I've been AWOL for too long...
                    by hotshot
                    Had to smile at that, as I bought that exact same hammer drill, for about the same reason

                    -----Randy...
                    08-10-2022, 10:09 PM
                  • Daddy's scroller
                    Reply to I've been AWOL for too long...
                    by Daddy's scroller
                    Have a fun safe trip Jim. I hope pictures to follow...
                    08-10-2022, 06:46 PM
                  • jim_mex
                    Reply to Scroll saw table angle??
                    by jim_mex
                    I have my Dewalt mounted onto an adjustable metal stand I made which after setting the table at different degrees of inclination I find 7 1/2" degrees to be fine for me. However before deciding on whatever angle you want to set the table you need to decide what seat height of stool or chair you...
                    08-10-2022, 04:08 PM
                  Working...
                  X