Announcement

Collapse
No announcement yet.

Carving a Headboard

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    Re: Carving a Headboard

    Hi Lindy,

    While not a headboard, I have relief carved many nautical scenes in Mahogany boards. Depending on the type of Mahogany used, the most common Mahogany has a trick to the grain. The board will have thin strips of grain running in the opposite direction from the rest of the board. As long as you know to expect this you can work around it, but it can surprise the heck out of you.

    Best I can offer you is draw on your design, keep your tools razor sharp and take your time. Some carvers use a drill press and Forsner bits to reduce their backgrounds, then carve to finish, but I prefer to do it by hand. You get a feel for the wood that way and therefore no surprises.

    Have fun with it, would love to see pictures of the finished product.

    Bob

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: Carving a Headboard

    check with Dale here on the forum, he I think has carved some and pretty sure he has carved some mantels...similar anyway!

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: Carving a Headboard

    I carved on one when I was a kid, and as I recall, got my bottom warmed pretty good for it....

    The only adviice I can give is to read everything you can lay your hands on r.e. relief carving large panels. Warping is a problem with them, so best to bone up on methods to avoid it.

    Leave a comment:


  • Lindy
    started a topic Carving a Headboard

    Carving a Headboard

    Has anyone here carved a headboard? I thinking about trying to do one in Mahogany (Honduras of course) and any advice would be greatly appreciated. The design I have come up with is a mountainscape with a Hunter's Moon in the background and as I move forward into the foreground having the mountains fade to foothills. Well that's my basic and rather rough idea right now. :-/

    Advice from anyone who has tried this type of project would be greatly appreciated. :

    Lindy

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Quartz43
    Reply to Work in Progress. What is with FOX publishing?
    by Quartz43
    Maybe nothing has changed ? But is there anything that can be done to make it easier. The very large projects are difficult to copy over several pages and put together properly. I believe in making improvements and not preserving the status quo.

    I enjoy the challenge of cutting a project...
    Yesterday, 08:48 PM
  • keystonecop
    Reply to Work in Progress. What is with FOX publishing?
    by keystonecop
    This is not a problem with the magazine for my issue.. It is a problem with the book having resized the drawings without giving the actual size.

    I do again apologize for my post.. I cannot use the right words to explain it.. so maybe someone should just remove the post....
    Yesterday, 07:29 PM
  • markdavd
    Reply to Work in Progress. What is with FOX publishing?
    by markdavd
    Reading these replies, I am still trying to figure out what the problem really is. I haven't noticed changes in how they publish recently and I don't think I ever had trouble making copies of of the patterns I want to cut.

    How did you copy the patterns 10 years ago? What has changed?...
    Yesterday, 06:43 PM
  • Quartz43
    Reply to Work in Progress. What is with FOX publishing?
    by Quartz43
    I am very glad to hear this and that Fox will look into the issue. Hopefully, they can do some things to try to make it easier to copy patterns.
    Yesterday, 06:34 PM
  • keystonecop
    Reply to Work in Progress. What is with FOX publishing?
    by keystonecop
    First I didn't mean to stir up a hornet's nest. Sorry for that. I will share that Kaylee Schofield reached out to me after my post (not sure if this forum or Facebook. From my past experience with her, she cares. I do believe she will address this issue. I do not think she is the type of person...
    Yesterday, 05:36 PM
Working...
X