Announcement

Collapse
No announcement yet.

Congratulations Carole

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Those were the days, Dick! We had so much fun at Saratoga Springs, and will always remember the get-together at McDonald's with you, Debbie McGowan, and the rest of the gang. Your warmth and support made me feel part of one big scrolling family!

    It took courage to "upscale" at a time when everyone we knew was downscaling, but we never regretted it, or looked back. Leaving the condo and its toxic atmosphere made us feel like we were reclaiming our life. And having two shops, connected by intercom, was something we never imagined!

    I appreciate your good thoughts and kind words, and hope to continue writing and creating for many years to come.

    Carole

    Follow me on my blog: www.scrollsawbowls.blogspot.com

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • Bill Wilson
      Reply to wipe on poly and tack cloth
      by Bill Wilson
      First, follow the instructions on the can, regarding wait time between coats. I would think that for the first couple coats, re-applying while the previous coat was still tacky wouldn't be terrible, but I would warn that building several coats without allowing proper drying time, will extend the overall,...
      Today, 08:50 AM
    • Don in Brooklin On
      Reply to wipe on poly and tack cloth
      by Don in Brooklin On
      I use wipe on poly quite often and I apply 2 thin coats before sanding with 220 or 320. I wipe with a lint free. Someone told me not to use tack cloth as you can leave behind a wee bit of beeswax witch could cause issues later on.

      I make sure that the surface is dry and not tacky before...
      Yesterday, 05:41 AM
    • dwssr2
      wipe on poly and tack cloth
      by dwssr2
      Question, when sanding polyurethane in between coats, using a tack cloth, is it ok to wipe on poly while the project seems tacky or should a person wait a few hours to let it dry?
      How necessary is it to sand between coats of polyurethane? I am sure people have a lot of different opinions and...
      04-24-2019, 05:58 PM
    • tgiro01
      Reply to Do you know what this Is?
      by tgiro01
      Betty asked: "Where does the responsibility of the maker of an item end and the responsibility of the purchaser begin? My sealife puzzle is purchased by older people due to its complexity but - if they leave it laying around and a child gets a part and chokes, is that my responsibility or theirs?"...
      04-24-2019, 12:20 PM
    • RJweb
      Reply to Do you know what this Is?
      by RJweb
      The problem now a days everyone is sue happy, no matter who’s at fault, RJ...
      04-24-2019, 10:03 AM
    Working...
    X