Announcement

Collapse
No announcement yet.

Next Issue?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Next Issue?

    When is it due? I can't seem to find anywhere on the site where it says - unless I being blind or stupid - either of which are possible...
    Ian

    Scrolling with a Dewalt 788

  • #2
    Ian.
    I have been called both those things lots of times It just kind of rolls off
    All kidding aside , I have been searching for the last issue for a month or so now and never did find a copy. Another scrollsaw magazine is everyhwere in the magazine stands but this one is not to be found anywhere in my part of BC or within 100 miles south of the border in Idaho. It used to be available in Sandpoint Idaho but have never found it there for a year now.
    There was something in particular I wanted to check out in the last issue so if it is no longer on the magazine racks I will keep looking for the next one.
    W.Y.
    Last edited by William Young (SE BC); 12-19-2006, 12:45 AM.
    http://www.picturetrail.com/willyswoodcrafting

    The task ahead of us is never as great as the power behind us

    Delta P-20 Scroll Saw, 14" x 43" Craftex Wood Lathe and Jet 10" Mini Lathe .

    Comment


    • #3
      Are you searching for the Christmas issue?
      Dragon
      Owner of a nice 21" Excalibur
      Owner of a Dewalt 788
      PuffityDragon on AFSP

      Comment


      • #4
        Yes it was issue 25 I believe but it's too late now for what I was looking for.
        I could have ordered a back issue direct. Maybe I still will.
        I will be spending some more time across the border in the next week or so and do another search there first.
        W.Y.
        http://www.picturetrail.com/willyswoodcrafting

        The task ahead of us is never as great as the power behind us

        Delta P-20 Scroll Saw, 14" x 43" Craftex Wood Lathe and Jet 10" Mini Lathe .

        Comment


        • #5
          There were a load of unbought Issue 25s in Homedepot in Halifax yesterday - FC must have flooded this end of Canada and left out BC, Bill.

          It was issue 26 I was actually wondering about - I just found a message from Mac on here mentioning the Spring edition - coming out mid-December... but no sign of a new issue being mentioned on the site here.

          I can usually get either scrolling magazine locally here - two or three of the local stores stock them. For a fairly small town there is a pretty good choice of woodworking magazines here in general ..
          Ian

          Scrolling with a Dewalt 788

          Comment


          • #6
            It should be mailing out to subscribers in a few days, and will hit newsstands in Mid-January

            Bob
            www.GrobetUSA.com

            Comment


            • #7
              As far as the Holiday issue...well...we had to go back and print some more...we sold out VERY quickly...

              Bob
              www.GrobetUSA.com

              Comment


              • #8
                William
                Check your PM
                Dragon
                Owner of a nice 21" Excalibur
                Owner of a Dewalt 788
                PuffityDragon on AFSP

                Comment


                • #9
                  Bill
                  Went out the door with the hubby this morning.
                  Dragon
                  Owner of a nice 21" Excalibur
                  Owner of a Dewalt 788
                  PuffityDragon on AFSP

                  Comment


                  • #10
                    Dragon-- that was so sweet of you ( I read between the lines )--You will make a excelent member to our little family-
                    Old Mother Hen here-
                    Sharon

                    Comment


                    • #11
                      Thank you very much Dragon . That was very kind of you and much appreciated.
                      I owe ya one
                      W.Y.
                      http://www.picturetrail.com/willyswoodcrafting

                      The task ahead of us is never as great as the power behind us

                      Delta P-20 Scroll Saw, 14" x 43" Craftex Wood Lathe and Jet 10" Mini Lathe .

                      Comment

                      Unconfigured Ad Widget

                      Collapse

                      Latest Topics

                      Collapse

                      • Rolf
                        Reply to I admit it... I splurged on a new "toy"
                        by Rolf
                        So glad they were supportive, it is a bit disappointing that they had to be. But like any tool manufacturer they have to out source many of the components like the motor. At least the motor is mounted externally for an easy change. How true was the blade to the miter slots etc.
                        I like the fact...
                        Today, 08:34 AM
                      • will8989
                        Reply to Farmers market
                        by will8989
                        Steve posted it about 2 weeks ago. I just put out a small sampling of items to see what people are interested in. Seems to be everything! I did notice I had more credit charges than last year. But the ones who paid cash were the ones who paid $7 for a gallon of milk and $10 for a loaf of sourdough bread....
                        Today, 08:17 AM
                      • Sandy Oaks
                        Reply to Farmers market
                        by Sandy Oaks
                        Way to go, Betty. Our farmers market does not allow craft sales.
                        Today, 08:17 AM
                      • Rolf
                        Reply to Farmers market
                        by Rolf
                        Good for you! Who designed the small nativity?
                        Today, 08:10 AM
                      • NC Scroller
                        Reply to Supermax
                        by NC Scroller
                        Two great customer service stories on this forum in a week. There is hope. Even in 2020.
                        Today, 08:00 AM
                      Working...
                      X