Announcement

Collapse
No announcement yet.

Galleries back up, with problems....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Galleries back up, with problems....

    Well I see the Scroller Galleries are back up, but I am unable to upload some new pictures I have, I also noticed when I clicked on a few of the most recent contributions a "not found in data base" came up on my screen!
    Bill

    DeWalt 788



    aut viam inveniam aut faciam

    God gives us only what we can handle.. Apparently God thinks I am one tough cookie.....

  • #2
    Bill, you must have a virus. Just kidding. They must still be having technical difficulties. At least they're getting closer.
    Mike

    Making sawdust with a Dremel 1680.
    www.picturetrail.com/naturephotos

    Comment


    • #3
      Sorry for the inconvenince. I'm working on fixing the problem...

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        What thickness of film seems to work the best for puzzles?
        The bags seem easier on the surface.
        But the film seems like it is more versatile on size variations.
        Yesterday, 03:24 PM
      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Yesterday, 10:32 AM
      • Sandy Oaks
        Reply to Shrink wrap systems
        by Sandy Oaks
        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
        Yesterday, 09:46 AM
      • NC Scroller
        Reply to Bruce, the one on probation
        by NC Scroller
        I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
        Yesterday, 07:42 AM
      • NC Scroller
        Reply to Shrink wrap systems
        by NC Scroller
        I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

        To use the bags you will need a sealer. I have one very similar...
        Yesterday, 07:39 AM
      Working...
      X