When the new issue do out.
Announcement
Collapse
No announcement yet.
new issues
Collapse
X
-
Holiday issue in September? BobD, I thought we had this conversation a few years back and it should be Christmas in JULY!!! Gees, guess you guys aren't listening!!!I am cutting holiday stuff from last year's magazines. This year will have to wait until next year. With 14 shows booked Sept to Dec, no time to do a whole of new stuff. You know, I'm only half-joking on this, right?
Betty
"Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital
Comment
-
So... is the fall issue already out and received?
Comment
-
Holiday issue in September? BobD, I thought we had this conversation a few years back and it should be Christmas in JULY!!! Gees, guess you guys aren't listening!!! I am cutting holiday stuff from last year's magazines. This year will have to wait until next year. With 14 shows booked Sept to Dec, no time to do a whole of new stuff. You know, I'm only half-joking on this, right?
Best Regards,
Bob Duncan
Technical Editor
Comment
-
I know I know. But even Sue has holiday projects on her site and that was in JUNE!!! I just like jerking your chain once in a while. It's been a long time since I did that!!! LOLBetty
"Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital
Comment
-
I Think there should be a new issue comming out shortly, well before Sept.Rolf
RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
Philosophy "I don't know that I can't, therefore I can"
Proud Member of the Long Island Woodworkers Club
And the Long Island Scrollsaw Association
Comment
-
Originally posted by Rolf View PostI Think there should be a new issue comming out shortly, well before Sept.
I went into Manage Your Account and signed in and then clicked on View Details and (or here in the south it's just Wa-la).
So that's how I came up with Sep, 26th 2012.
-Bill
Next Issue:HOLIDAY 12, approx. mail date Sep, 26th 2012Last edited by wwalker47; 07-02-2012, 11:23 PM.-Bill
My saw is a DeWalt788 Measure twice; cut once; count fingers after cut
Comment
-
Originally posted by Rolf View PostI Think there should be a new issue comming out shortly, well before Sept.
You are right the Fall issue just came and I got it today.How about that. I guess the Manage Your Account resource that I got my info from did not say the next issue will be Fall. What about it, Bob?
Anywho, this is a real good issue has a lot of good stuff. At the present I am cutting to restock my booth and then I can get to the new designs.
Sorry about the mix-up there.
-Bill-Bill
My saw is a DeWalt788 Measure twice; cut once; count fingers after cut
Comment
-
I think I did some test cutting for this issue that why I knew there was another issue. Whats on the cover?Rolf
RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
Philosophy "I don't know that I can't, therefore I can"
Proud Member of the Long Island Woodworkers Club
And the Long Island Scrollsaw Association
Comment
-
Originally posted by Rolf View PostI think I did some test cutting for this issue that why I knew there was another issue. Whats on the cover?
On the cover is the Stately Lion Portrait designed by Ralph Hammer. Doesn't say who cut it.
But your cutting of the Celtic Knot Puzzle was great! Doesn't look to difficult to cut except for not mixing up the pieces and never getting it back together again.
-Bill-Bill
My saw is a DeWalt788 Measure twice; cut once; count fingers after cut
Comment
-
I received my fall issue two days ago. Like Walker said has the lion head on the cover.
It maybe my imagination but the magazine has a little different look to it..... But then I could be wrong. How about it anyone else think it has a different feel?
Comment
Unconfigured Ad Widget
Collapse
Latest Topics
Collapse
-
by Dave56Has anyone made any adjustments to the eccentric or connectors on the Hegner M22
-
Channel: Beginners Scroll Saw
Today, 04:59 PM -
-
Reply to Hegnerby Dave56Has anyone replaced the eccentric on the Hegner scroll saw or made any adjustments to this part.
I bought an used Hegner m22 and it vibrates at about 3/4 speed. Maybe I'm just over thinking this problem, last year I purchased a multi cut 3/25 inch Hegner it is a single speed and it runs like a...-
Channel: Tools and Blades
Today, 04:50 PM -
-
Reply to First Word Art Patternby cwmageeI love the signs likke this. I find it interesting watching the reactions of fellow humans.
-
Channel: Works in Process
Today, 03:04 PM -
-
by MidMich324Thank- you all the ideas. I will check in again next week to see some more.
-
Channel: Tools and Blades
Today, 02:54 PM -
-
Reply to Mothers day flowersby jim_mexLove them Rolf. What a cheery way to brighten up anyone's day! 🤩
-
Channel: General Scroll Saw
Yesterday, 03:34 PM -
Comment