Announcement

Collapse
No announcement yet.

magazine delivery

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • magazine delivery

    How long should the magazine take to deliver to the UK? It has been over a month.
    UKhttp://www.youtube.com/user/michaelsscrollsaw
    sigpic

  • #2
    Did you order it directly from Fox Chapel Publishing (Scroll Saw Woodworking & Crafts) or through another distributor in the UK?

    PM me with your full name and mailing address, and I'll check into it for you.

    Best Regards,
    Bob Duncan
    Technical Editor
    www.GrobetUSA.com

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • NC Scroller
      Reply to Shrink wrap systems
      by NC Scroller
      My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
      Today, 07:42 AM
    • will8989
      Reply to Shrink wrap systems
      by will8989
      None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
      Today, 12:20 AM
    • Linda In Phoenix
      Reply to Shrink wrap systems
      by Linda In Phoenix
      What thickness of film seems to work the best for puzzles?
      The bags seem easier on the surface.
      But the film seems like it is more versatile on size variations.
      Yesterday, 03:24 PM
    • will8989
      Reply to Bruce, the one on probation
      by will8989
      Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
      Yesterday, 10:32 AM
    • Sandy Oaks
      Reply to Shrink wrap systems
      by Sandy Oaks
      As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
      Yesterday, 09:46 AM
    Working...
    X