No announcement yet.

Article discussion thread:Coloring With Natural Dyes

  • Filter
  • Time
  • Show
Clear All
new posts

  • Article discussion thread:Coloring With Natural Dyes

    This is a dedicated thread for discussing article: Coloring With Natural Dyes

  • #2
    Interesting article. I think I would need to keep a log of what i used and what color it produced. I shared this article on FB.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC


    Unconfigured Ad Widget


    Latest Topics


    • handibunny
      Reply to Question about tilting head saws
      by handibunny
      It doesn’t matter whether the saw table tilts or the saw arm tilts. Either can be used for any project cut at an angle, and there’s a learning curve for each.

      I actually prefer the tilting table because the blade remains vertical. I find that at really steep angles, like 40 or 45 degrees,...
      Today, 02:10 PM
    • will8989
      Reply to What you find when cleaning out a cedar chest
      by will8989
      This is the tapestry I found in the cedar chest. We can’t identify where the pictures are from. Two among many. I also forgot to mention dad was also in the army Fife and Drum Corps and also played with a big band when he was discharged. Have to find that info....
      Today, 12:34 PM
    • will8989
      Reply to Bruce doing great
      by will8989
      What a morning. The therapists were quite pleased with what he could do. He took the wrap off today and he can walk with the walker with very little pain. It’s getting the leg completely straight that is hard to do. It’s when his brother stopped in that things went off rails. Rolf, we are talking...
      Today, 12:19 PM
    • Sandy Oaks
      Reply to Question about tilting head saws
      by Sandy Oaks
      If you are referring to 3D Compound cutting, the blade is 90 degrees to the table and not tilted. I use the tilting head for things like inlays and Carole's bowls. If you want a tilting arm, be sure it is rack and pinion. Look at other features that may fit your needs. As a Pegas dealer, I can help...
      Today, 11:32 AM
    • Jim Lowder
      Reply to Need Advice Refurbishing Somerville Excalibur 30
      by Jim Lowder
      I think the foot release was an option. I don’t see the pulley for it on the back of yours. Although it may have been removed. It is a very simple concept, it’s a cable attached to the back of the saw to release the arm
      Today, 10:10 AM