Announcement

Collapse
No announcement yet.

Pray for My Hearing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pray for My Hearing

    The preacher said, "Anyone with a special request who wants to be prayed over, please come forward to the front by the altar."


    With that, Leroy got in line, and when it was his turn, the Preacher asked, "Leroy, what do you want me to pray about for you?"

    Leroy replied, "Preacher, I need you to pray for help with my hearing." The preacher put one finger of one hand in Leroy's ear, placed his other hand on top of Leroy's head, and then prayed and prayed and prayed. He prayed a "blue streak" for Leroy, and the whole congregation joined in with great enthusiasm.

    After a few minutes, the preacher removed his hands, stood back and asked, "Leroy, how is your hearing now?"

    Leroy answered, "I don't know. It ain't 'til next week.

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • will8989
    Reply to My beauties
    by will8989
    He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
    Today, 10:55 AM
  • Rolf
    Reply to Cutting guide for straight cut on a scroolsaw
    by Rolf
    Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
    Today, 07:54 AM
  • Rolf
    Reply to My beauties
    by Rolf
    I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
    Today, 07:49 AM
  • NC Scroller
    Reply to My beauties
    by NC Scroller
    You are one busy lady. About how long does it take to cut one?
    Today, 05:51 AM
  • NC Scroller
    Reply to Hegner Multimax-18 for sale Tucson
    by NC Scroller
    Good luck.
    Today, 05:47 AM
Working...
X