Fred the Cowboy

Reply to Lower Blade Clamp Wrench for a Delta 40-540

by NC Scroller

Glad you got it worked out. Happy endings are always the best. Can you post a picture? It might be helpful to someone else in the future....
- Channel: Tools and Blades
Today, 03:44 PM
Reply to Minor Question About Bowls

by scrollerpete

If the bowl is not used for wet stuff you can use Titebond glue that dries up invisible. My trick is after applying the glue and I used my bowl press from Carol, after a few minutes, release the press and use a plastic straw cut at an angle to remove the excess glue.
https://www.leevalley.com...
- Channel: Bowls, Boxes, Compound, and other 3-D Projects
Today, 02:08 PM
Reply to Lower Blade Clamp Wrench for a Delta 40-540

by RoyzMG

Thanks for the comments. I finally designed my own tool that works great.
- Channel: Tools and Blades
Today, 01:16 PM
Minor Question About Bowls

by RoyzMG

I'm just beginning to try my hand at bowls and I've been following Carol Rothman's book on scroll saw bowls. I'm on my second bowl and now understand why you need to sand the inside before attaching the bottom ring. My question deals with gluing the bottom ring. It appears to be very important to...
- Channel: Bowls, Boxes, Compound, and other 3-D Projects
Today, 01:15 PM
Reply to Bigger Projects

by Chance13

I have a 20" Delta that I made Judy''s "Hidden Forest" with. Took me all of 9 months of trying to find the right wood,etc.
You could use a 16" saw as you can break down the pattern and pieces into smaller sections.

I won a best of show ribbon with it.
Excuse...
- Channel: Beginners Scroll Saw
Yesterday, 12:57 PM

Announcement

Unconfigured Ad Widget

Latest Topics