Announcement

Collapse
No announcement yet.

air turbo carving

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Big_Sid
    replied
    Re: air turbo carving

    Bette,

    Nice bears!!!!!! I have always wanted to carve a bear. I will see if I can get in Debby's class sometime.

    Leave a comment:


  • Bette
    replied
    http://www.PictureTrail.com/BetteFranke

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: air turbo carving

    Haven't tried any projects myself but according to a good friend the smell from grinding is really intense. He was carving a design in an antler of some kind. Guess you need to stay upwind if possible.
    Good luck!!

    Leave a comment:


  • Paul
    started a topic air turbo carving

    air turbo carving

    Has anyone tried the turbo carver for bone and/or antler,and inlays.Like to have some opinions ,if you own one or have personaly tried one. Thanks ,Paul ???

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • will8989
    Reply to My beauties
    by will8989
    Looks like glass with the sun shining through it....
    Today, 08:08 AM
  • will8989
    Reply to My beauties
    by will8989
    He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
    Yesterday, 10:55 AM
  • Rolf
    Reply to Cutting guide for straight cut on a scroolsaw
    by Rolf
    Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
    Yesterday, 07:54 AM
  • Rolf
    Reply to My beauties
    by Rolf
    I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
    Yesterday, 07:49 AM
  • NC Scroller
    Reply to My beauties
    by NC Scroller
    You are one busy lady. About how long does it take to cut one?
    Yesterday, 05:51 AM
Working...
X