Announcement

Collapse
No announcement yet.

Happy Birthday Rolf

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Happy Birthday Rolf

    Happy birthday. I hope the birthday angel (June) brings you what you want.
    Scott
    Creator of fine designer sawdust.

  • #2
    And best wishes for many, many more. But is there anything left for June to give you for a gift?
    Carole

    Follow me on my blog: www.scrollsawbowls.blogspot.com

    Comment


    • #3
      Doing some travel and missed this yesterday. Hope you had a great day and I feel there will be some type of mystery guessing game in the near future.
      Jim
      When looking at the clock at work--the correct time is:
      Too early to leave, too late to call in.

      Comment


      • #4
        And a happy birthday from me to you as well Rolf

        Dan

        Comment


        • #5
          Thank you all! I am going to get soppy for a moment, not easy for a cranky old German . June is my best gift of all! Besides the 29 years of joy, she has been my most ardent supporter, especially when it comes to my hobbies.

          There is not much room in my workshop for new toys but she did give me this vise (with a bit of guidance from me)

          It will be great as a third hand on the bench and also on my drill press.
          wood river Quick vice.jpg

          Attached Files
          Rolf
          RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
          Philosophy "I don't know that I can't, therefore I can"
          Proud Member of the Long Island Woodworkers Club
          And the Long Island Scrollsaw Association

          Comment


          • #6
            Happy Belated Birthday Rolf! Hard to believe you and June are on 29 years when it's only your 25th birthday again. LOL
            Tim

            If you need a tool and don't buy it, you will pay for it and not have it

            Comment


            • #7
              Belated Happy Birthday Rolf!

              There comes a time in life when it would be nice to instead of adding a year on to your age on your birthday to be able to remove one.Speaking as one who has reached and passed that point let me tell you that this doesn't pan out! Best you celebrate the fact that you are still around and make the most of every minute of every day you are above ground.

              I hope you had a great day and that June spoilt you rotten.

              As for having a new 'vice' for your birthday I am sure that there is a double meaning there somewhere but for once I'll bite my tongue and stay silent! 😁

              Cheers!!!
              Jim in Mexico

              Logic will get you from A to B. Imagination will take you everywhere.
              - Albert Einstein

              Comment


              • #8
                Sorry I’m late but hope you had a great day. Amazing that June knows exactly what to get you.
                Betty

                "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

                Comment


                • #9
                  I'm late on the birthday wagon too--- happy new year to you Rolf!
                  Linda at www.ArtIngrained.com

                  Comment


                  • #10
                    Thank you all for the kind wishes!
                    Rolf
                    RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
                    Philosophy "I don't know that I can't, therefore I can"
                    Proud Member of the Long Island Woodworkers Club
                    And the Long Island Scrollsaw Association

                    Comment


                    • #11
                      More belated birthday wishes for you Rolf. πŸŽ‚πŸŽˆπŸŽ‰
                      Melanie from East TN

                      Comment

                      Unconfigured Ad Widget

                      Collapse

                      Latest Topics

                      Collapse

                      • Rolf
                        Reply to Arizona Animals Intarsia Collage Fair Results
                        by Rolf
                        Our Judges are some of the best woodworkers I have ever met. On occasion I get asked to explain what I look for in the scrolling categories. I point out all of the nuances. I can't be a judge as I have intarsia and scroll work entries.
                        Today, 07:36 AM
                      • Rolf
                        Reply to Problem with thinner blades on Dewalt 788
                        by Rolf
                        There may have been some crud on the tips from manufacturing.
                        In the ~20 years of scrolling I never cleaned the ends of my blades until recently. Even with the Pegas clamps I was having some blade slippage, I now scuff the ends of my blades with some 220 grit paper End of problem.!...
                        Today, 07:29 AM
                      • NC Scroller
                        Reply to Problem with thinner blades on Dewalt 788
                        by NC Scroller
                        Don’t over sand them as you will shorten their usable life. Only sand as needed. Another thing to do is clear your blades before installing. Blades are coated with oil to prevent rust. Wipe the ends with alcohol or lightly sand with 320 grit.
                        Today, 05:29 AM
                      • cwmagee
                        Reply to Problem with thinner blades on Dewalt 788
                        by cwmagee
                        The fact that you only had approximately 6 hours on the saw tells me there was a thin oily film on the clamps from the manufacturing process.
                        If problem continues you may have spread the clamps in the process of tighten blades. A common problem with OEM parts. This issue will disappear by replacing...
                        Yesterday, 08:46 PM
                      • will8989
                        Reply to Mitre saw material clamps
                        by will8989
                        10” compound dual bevel sliding mitre saw with laser. Bruce said to buy a new blade because the blade that comes with it sucks. Sells here for $289. It was on sale plus his military discount and a $50 gift certificate from his woodworking club. Bruce said to check out on Google 10” kolbalt mitre...
                        Yesterday, 08:45 PM
                      Working...
                      X
                      😀
                      🥰
                      🤢
                      😎
                      😡
                      👍
                      👎