Announcement

Collapse
No announcement yet.

Power Carving burr cleaner

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BasketballJones
    replied
    Re: Power Carving burr cleaner

    I spray oven cleaner in the cap and soak them there. Then brush it off. Got that tip from Yahoo Powercarving club a while back.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: Power Carving burr cleaner

    I soak them in denatured alcohol for 20-30 minutes and then use a small brass brush. Works pretty good.

    Leave a comment:


  • Kenny_S
    replied
    Re: Power Carving burr cleaner

    Wood Carvers Supply,Inc has aroduct called Pitch RX for cleaning burrs. Says it easily removes pitch,gum and resin from
    Carbide and steel burrs and worls well on diamond ruby and sapphire stones. Actually, a host of tools it works on.

    Wood Carvers Supply,Inc
    PO Box 7500,Englewood Fl, 34295-7500
    1-800-284-6229

    Leave a comment:


  • Dale_O
    replied
    Re: Power Carving burr cleaner

    I use a propane torch and a wire brush.

    Dale

    Leave a comment:


  • Beattle_Bailey
    started a topic Power Carving burr cleaner

    Power Carving burr cleaner

    Hey all you power carvers, what do you use to clean the burned on wood from your carving bits? Some one told me to use oven cleaner, but it didn't do a very good job. ???

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • jim_mex
    Reply to New PC keyboard has an error
    by jim_mex
    Hi guys - it seems like I am back in business. The offending 'F' key seemed to lack sufficient travel to push down on the main board so I stuck a thin sliver of plastic under it with super glue and that seems to have solved the problem.

    The only downside is I now have no excuses for my...
    Today, 08:42 AM
  • Rolf
    Reply to Home remodeling completed !!!
    by Rolf
    WOW! I really like your taste in doors etc. I have have always leaned towards contemporary / modern. But our house is a small cape and that style would not suit it. Since we are both Geminis we have 4 people and our house is very eclectic. Each room has a bit of different style.
    Today, 08:20 AM
  • Rolf
    Reply to New tools
    by Rolf
    You tube is a real blessing when it comes to learning new stuff. I have watched one that compared the flux core and gas mig weld. If I remember correctly polarity comes into play. The flux core weld was really nice. Have fun.
    I was told by the cardiologist that I am not allowed to weld because...
    Today, 08:14 AM
  • Rolf
    Reply to New PC keyboard has an error
    by Rolf
    The contacts on the keyboard main board are a screen printed silver metal the keys have small membrane switches under them, the probability of repair is slim. spilled coffee takes out the contacts almost instantly, the voice of experience,
    Today, 08:06 AM
  • NC Scroller
    Reply to New PC keyboard has an error
    by NC Scroller
    Only our riend Jim....😂😂😂
    Today, 06:24 AM
Working...
X