Announcement

Collapse
No announcement yet.

Inserting links to old threads?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Inserting links to old threads?

    I thought I would ask this here. I would like to know how to insert a link to an old thread in this forum so as not to repeat things over and over.
    I have seen some of you wizards do it.
    Rolf
    RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
    Philosophy "I don't know that I can't, therefore I can"
    Proud Member of the Long Island Woodworkers Club
    And the Long Island Scrollsaw Association
    Tags: None
  • #2
    Originally posted by Rolf
    I thought I would ask this here. I would like to know how to insert a link to an old thread in this forum so as not to repeat things over and over.
    I have seen some of you wizards do it.
    1.Bring up the old thread
    2.Highlight the address in the address bar at the top of the browser by dragging the mouse.
    3. Copy the address (quickest way is to use CTRL C)
    4. Go to the post where you want the address to appear and paste the adress you just copied (CTRL V)

    5. Marvel at windows technology ...

    Hope this helps ..
    Ian

    Scrolling with a Dewalt 788

    Comment

    • #3
      Thanks Ian, i did'nt know that either.
      kevin/pitbull.

      Comment

      • #4
        Duh! I should have known that as I do it all the time elsewhere.
        I was thinking that there was some internal simple link on the forum itself.

        Thanks Ian
        Rolf
        RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
        Philosophy "I don't know that I can't, therefore I can"
        Proud Member of the Long Island Woodworkers Club
        And the Long Island Scrollsaw Association

        Comment

        Previous template Next

        Unconfigured Ad Widget

        Collapse

        Latest Topics

        Collapse
        • NC Scroller
          Reply to My covid angel
          by NC Scroller
          Whatever way you decide to do if you are happy and your brother in law is happy it was a good idea. If you really want to be brave use it as a learning experience. Make several of them using different suggestions and see the difference....
          Today, 12:35 PM
        • Bill Wilson
          Reply to Tough Decisions
          by Bill Wilson
          Well, unfortunately, I have also decided to let my subscription lapse. I've been debating it for the past couple years. It isn't so much the money, but it's more the disappointment when yet another issue has so little in it that really appeals to me. The final straw was this past Fall/Winter edition...
          Today, 09:51 AM
        • planeur
          Reply to My covid angel
          by planeur
          Thanks to all !😀 Your comment are very good and make sense!

          My piece is 8"X8" X 1/2" thick.
          I though when I cutted the piece to do it in 1 piece or 4/5 , but after a while I decided to do it in one piece and carved it to have a 3D aspect.
          Was it a good idea.....?...
          Today, 09:45 AM
        • Rolf
          Reply to My covid angel
          by Rolf
          Great designe! I would have gone a bit further than Linda, Scott and Gladefade I would cut it into more pieces to make shaping easier. Taper the clouds from right to left, taper the wings so that they are lower where they attach to the body. Taper the neck so that it looks like it is going into the...
          Today, 09:02 AM
        • Rolf
          Reply to Tough Decisions
          by Rolf
          The never ending dilemma. I only get two magazines SSWWC and Wood carving Illustrated. Even if I don't make something in every issue there is usually something in each one that I have never tried and that will either challenge or inspire me. Yes I know that I do test cutting for them and they have occasionally...
          Today, 08:49 AM
        View All
        Working...
        X