Announcement

Collapse
No announcement yet.

Last person to post wins! :)

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts

  • CanadianScroller
    replied
    Originally posted by BobD
    Well.... I can still post. So, what have I won?!?!
    Well Bob, you have just won an all expense paid trip to the beautiful Islands of Hawai'i

    To redeem your prize please send a check or money order for the sum of $7000 to Carl Hird-Rutter C/O fox Chapel Publishing.

    I will also take cash but no credit cards.

    Leave a comment:


  • BobD (Archive)
    replied
    Well.... I can still post. So, what have I won?!?!

    Leave a comment:


  • CanadianScroller
    replied
    Ok I moved Trouts post to the end of my message
    not sure if I can post after it is locked.

    Is the cheque in the mail? Trout was the last
    Originally posted by Trout
    I asked first....for the moderators to lock this post!
    Last edited by CanadianScroller; 03-16-2007, 08:57 PM.

    Leave a comment:


  • Trout
    replied
    wait a minute...

    Originally posted by Woodbutcher68
    Don't be surprised if one of the Moderators wins this one!
    I asked first....for the moderators to lock this post!
    Originally posted by Trout
    Bob, Rob, Gill, Carl, Marcel, could you please lock this thread...so I'll be the last one to post.....

    Leave a comment:


  • Woodbutcher68
    replied
    Originally posted by kerry_nf
    I WILL have the last word...this I promise! LOL

    Don't be surprised if one of the Moderators wins this one!

    Leave a comment:


  • Woodbutcher68
    replied
    Quit looking over your shoulder, you're behind me now!

    Leave a comment:


  • woodwilldo
    replied
    Well now, i will sleep during the day and post at night so can win this deal. Wait what are we playing for? Oh thats right "The Last Word" (or post) Dang i'm confused, no whammy no whammy

    Jesse

    Leave a comment:


  • Daryl185
    replied
    bahhhhhhhhhhhhhh your all behind me now

    Leave a comment:


  • kerry_nf
    replied
    I WILL have the last word...this I promise! LOL

    Leave a comment:


  • Trout
    replied
    Bob, Rob, Gill, Carl, Marcel...

    could you please lock this thread...so I'll be the last one to post.....

    Thanks
    Trout

    Leave a comment:


  • Cutting Cathy
    replied
    My turn, my turn!!

    Cathy in NE

    Leave a comment:


  • kerry_nf
    replied
    Ha ha...think again!

    Leave a comment:


  • Woodbutcher68
    replied
    You just got bumped!

    Leave a comment:


  • kerry_nf
    started a topic Last person to post wins! :)

    Last person to post wins! :)

    This is just a silly post and the last person to do that (post) wins...so....I am the current winner!

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Rolf
    Reply to Arizona Animals Intarsia Collage Fair Results
    by Rolf
    Our Judges are some of the best woodworkers I have ever met. On occasion I get asked to explain what I look for in the scrolling categories. I point out all of the nuances. I can't be a judge as I have intarsia and scroll work entries.
    Today, 07:36 AM
  • Rolf
    Reply to Problem with thinner blades on Dewalt 788
    by Rolf
    There may have been some crud on the tips from manufacturing.
    In the ~20 years of scrolling I never cleaned the ends of my blades until recently. Even with the Pegas clamps I was having some blade slippage, I now scuff the ends of my blades with some 220 grit paper End of problem.!...
    Today, 07:29 AM
  • NC Scroller
    Reply to Problem with thinner blades on Dewalt 788
    by NC Scroller
    Don’t over sand them as you will shorten their usable life. Only sand as needed. Another thing to do is clear your blades before installing. Blades are coated with oil to prevent rust. Wipe the ends with alcohol or lightly sand with 320 grit.
    Today, 05:29 AM
  • cwmagee
    Reply to Problem with thinner blades on Dewalt 788
    by cwmagee
    The fact that you only had approximately 6 hours on the saw tells me there was a thin oily film on the clamps from the manufacturing process.
    If problem continues you may have spread the clamps in the process of tighten blades. A common problem with OEM parts. This issue will disappear by replacing...
    Yesterday, 08:46 PM
  • will8989
    Reply to Mitre saw material clamps
    by will8989
    10” compound dual bevel sliding mitre saw with laser. Bruce said to buy a new blade because the blade that comes with it sucks. Sells here for $289. It was on sale plus his military discount and a $50 gift certificate from his woodworking club. Bruce said to check out on Google 10” kolbalt mitre...
    Yesterday, 08:45 PM
Working...
X
😀
🥰
🤢
😎
😡
👍
👎