Announcement

Collapse
No announcement yet.

Build it and they will come

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Build it and they will come

    Rather large 100k pic. I got in email this morning


    This is the actual turnoff from Banff to the # 1 highway to Calgary.

    Great picture isn't it? They had to build the animals (especially the elk) their own crossing because that was where the natural crossing was and after the highway was built there were far too many accidents. I understand it didn 't take the animals long to learn that this was their "road .
    Attached Files
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

  • #2
    That's very cool. Is that new? I lived under a bridge in Banff for a few weeks years ago and don't recall seeing anything like that.
    Jeff Powell

    Comment


    • #3
      That is a great pic, Carl. I've driven over that piece of road but unforunately it was "elkless" at the time.

      We did see a lot of them in Jasper though - woke up one morning to find a herd of about 16 of them all round the cabins in the campsite we were staying at. They're very impressive animals .. and that is a beautiful part of Canada - away from the concrete overpasses of course ..lol
      Ian

      Scrolling with a Dewalt 788

      Comment


      • #4
        Amazing! Perfect title too!
        Bill

        DeWalt 788



        aut viam inveniam aut faciam

        God gives us only what we can handle.. Apparently God thinks I am one tough cookie.....

        Comment


        • #5
          I picture a sign that reads "bridge freezes before grass surface" - only in Elk
          Dan

          -Just do'in the best I can every day

          Comment


          • #6
            Originally posted by owler
            I picture a sign that reads "bridge freezes before grass surface" - only in Elk
            ROTFL Dan - I like that ...
            Ian

            Scrolling with a Dewalt 788

            Comment


            • #7
              Excellent pic Carl. Thanks for sharing. Boy we live in a beautiful country, don't we.
              Marsha
              LIFE'S SHORT, USE IT WELL

              Comment


              • #8
                Originally posted by Marsha
                Boy we live in a beautiful country, don't we.
                Marsha
                Well some parts at least, Marsha - not so sure about the concrete jungle round Toronto .. or some parts of Nova Scotia for that matter
                Ian

                Scrolling with a Dewalt 788

                Comment


                • #9
                  Are "Moose" droppings any good for Roses ? I know Horse dung is good and even Pig muck can be used on a garden but what about Moose ? This is just a thought i dont want anyone to send me any.lol
                  kevin/pitbull.

                  Comment


                  • #10
                    Same stuff different pile.
                    Don't worry pitbull, we wont send you any, We need it all here.
                    Why do you think our trees grow so tall?
                    CAЯL HIRD-RUTTEЯ
                    "proud member of the best scroll sawing forum on the net."
                    Ryobi SC180VS scroll saw EX21

                    Comment


                    • #11
                      Originally posted by pitbull
                      Are "Moose" droppings any good for Roses ?
                      I don't know about the roses but they do make good swizzel stick toppers for a cocktail. In Alaska they make all kinds of crazy stuff out of Moose Poo, there are ear rings, necklaces, Christmas Ornaments...etc.
                      Todd

                      Hawk G4, Dremel 1800

                      Quando Omni Flunkus Moritati

                      Comment


                      • #12
                        Originally posted by pitbull
                        Are "Moose" droppings any good for Roses ?
                        i agree with Carl - I think most animal poo - well rotted, as with horse manure - is probably good.

                        Toronto zoo sell "Zoo Poo" Kind of gives a whole new meaning to "Where there's muck there's brass"...
                        Ian

                        Scrolling with a Dewalt 788

                        Comment


                        • #13
                          Neat picture.


                          Now if you could only figure out a way to get your Canada geese back I would appreciate it.
                          Rolf
                          RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
                          Philosophy "I don't know that I can't, therefore I can"
                          Proud Member of the Long Island Woodworkers Club
                          And the Long Island Scrollsaw Association

                          Comment


                          • #14
                            I would think with the new passport laws that shouldn't be a problem. Specially since they travel by air.
                            CAЯL HIRD-RUTTEЯ
                            "proud member of the best scroll sawing forum on the net."
                            Ryobi SC180VS scroll saw EX21

                            Comment


                            • #15
                              Originally posted by CanadianScroller
                              I would think with the new passport laws that shouldn't be a problem. Specially since they travel by air.

                              They tend not to land at airports though, Carl ..

                              I just had this wonderful mental image of the USAF patrolling the border checking for incoming Canada Geese .. ROTFL
                              Ian

                              Scrolling with a Dewalt 788

                              Comment

                              Unconfigured Ad Widget

                              Collapse

                              Latest Topics

                              Collapse

                              • will8989
                                Rolf,
                                by will8989
                                Are you ok Rolf?
                                Today, 05:43 PM
                              • Jim McDonald
                                Reply to About ornament exchange
                                by Jim McDonald
                                Dave, I will participate. Thanks for doing this again.
                                Today, 09:10 AM
                              • Rolf
                                Reply to Testing this blower motor
                                by Rolf
                                Without the complete schematic it is hard to know what is correct.
                                That said, it is a multispeed blower that obviously has a controller board. That board varies the power to the motor. By doing what you did you bypassed that. You put power across the low and high windings. If any thing connecting...
                                Today, 07:43 AM
                              • evilbadger
                                Reply to Testing this blower motor
                                by evilbadger
                                If he connected to red and black and the motor spun wouldn't that indicate the motor is grounded? Without connecting the white the circuit isn't complete and the motor should not spin.
                                Today, 06:40 AM
                              • cwmagee
                                Reply to Testing this blower motor
                                by cwmagee
                                The reason for the smoke is incorrect wiring, posible melted insulation between motor windings and motor frame.

                                You mentioned connecting power to the red & and black wire. Did you do anything with White wire? Per the lable on the motor the black wire is high the Red is low. White common...
                                Yesterday, 08:41 PM
                              Working...
                              X
                              😀
                              🥰
                              🤢
                              😎
                              😡
                              👍
                              👎