If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Pop, could you please post a bigger version of the picture you are using as an avatar, I'd like a better view.If you already have and I missed it, I apologize. Thank you, Dale
Thanks Rolf,
I actually tried painting the inside of the cuts before removing the pattern and tape. I initially used packing tape because I was out of painters tape. When I sprayed the cuts, apparently the paint bled into the fibers of the wood. But I have to say I have been redeemed by my wife....
Nice project, I really like the design. You did use a tough piece of material, I would normally suggest cutting at least 3 layers of 1/8 BB because you will get requests of them. I am curious as to why you got some black bleeding into the grain? Is this mounted on a black backer ?
This is my latest project and I'm still up in the air about it. The wood was reclaimed from a table that someone had thrown away. It is 3/4 MDF with veneer on both sides. The project is 11 x 14 and is pretty heavy. The pattern was from "Grandpa" and I believe his real name is Paul. I used...
Tweet
