Announcement

Collapse
No announcement yet.

Posting Pictures

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Posting Pictures

    Could somebody please tell me how to attach thumbnails to a post? I go to the bottom, manage attachments, pick out my pictures, make sure they are JPG, attach and PRESTO! They aren't there. I know we had a discussion on this someplace in the forum, but I can't find it. PLEASE HELP. I really would like to post some pictures so you can see that I really can scroll!!

    Thanks muchly.

    Betty
    Betty

    "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

  • #2
    Posting pictures

    Hi Betty, I had that problem and the solution was to resize the photos to 640 x 480 pixels. I hope this helps. Steve
    If This HillBilly Can't Fix it Then it Ain't Broke!!!
    My Gallery
    [email protected]

    Comment


    • #3
      It would, if my pictures would show in the first place!!!

      Thanks,

      Betty
      Betty

      "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

      Comment


      • #4
        Hey Betty,

        First, open your pics in a graphics program and make sure, if they aren't already, to resize them to no more than 640 X 480 and save them. Then, go in like you did and manage attachments. A screen pops up and click browse and when you locate one, double click it and the location will show up in the window. Do this for each picture. Then click upload. Wait for that to complete and make sure there are messages telling you that it's unable to do it. If A-OK, close the window and scroll near the bottom of the open page to where it says additional options. A little below that it will say attach files and your JPG's should be listed. If so, preview your post and they should be there.

        I hope this does it because I would really like to see if you can really scroll.
        Mike

        Making sawdust with a Dremel 1680.
        www.picturetrail.com/naturephotos

        Comment


        • #5
          Yeah, Im with Mike. Im betting you cant scroll.In fact, I'll bet you dont even know which way to point the teeth when you put the blade in! Your prolly some cushy girly girl thats afraid of sawdust! Dale
          Dale w/ yella saws

          Comment


          • #6
            Betty....I also had the same problem when I first started. I was forgetting to click the "upload" button after I attached the files???
            If it don't fit, don't force it....get a bigger hammer!!

            Comment


            • #7
              Mike, why 640 x480? According to the info on the manage attachments list the max size is 780x780? Is there something I'm missing?

              I usually just resize mine to 780 pixels on the longest side - width or height depending on picture format and it has always worked....
              Ian

              Scrolling with a Dewalt 788

              Comment


              • #8
                Ian, evidentally things have changed. I was aware that it was changed to accept 640 X 480 either direction but wasn't aware they increased the size limitations overall. I assume you are not referring to the gallery, which has no limitations.
                Mike

                Making sawdust with a Dremel 1680.
                www.picturetrail.com/naturephotos

                Comment


                • #9
                  Betty -- Do what I do --- e mail them to Neal and let him do it --
                  Love ya Neal ) Lol
                  Sharon

                  Comment


                  • #10
                    Check out this link...Thomp worked hard to put together some screen shots for us!

                    Bob

                    Comment


                    • #11
                      Originally posted by Minnesota scroller
                      Ian, evidentally things have changed. I was aware that it was changed to accept 640 X 480 either direction but wasn't aware they increased the size limitations overall. I assume you are not referring to the gallery, which has no limitations.
                      No I was referring to attachments. There is also a size limit in terms of memory useage 2.38MB - it's possible I guess that a picture could still be too large to post even at 780x780 if it was very high definition - but unlikely so long as it is in jpeg format.
                      Ian

                      Scrolling with a Dewalt 788

                      Comment


                      • #12
                        Dale:

                        You met me at the open house. Did I look like a girly girl to you? I wasn't doing the first step opening in a graphics program, whatever that is. I was doing everything else. I figured if I can email the pictures I have on here I should be able to upload them, right? Will give it another try!! I'll also check out Bob's link first.

                        Betty
                        Betty

                        "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

                        Comment


                        • #13
                          Here we go again. I have re-read everyone's helpful suggestions, especially Steve about the picture editor and will try again. Well didn't get far did I? When I resize the picture, it gives me a square in the upper left hand corner resized but all I get of the basket is the corner, it won't give me the full picture? I can't believe I can't figure this out!!

                          Betty
                          Betty

                          "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

                          Comment


                          • #14
                            Betty, give me a call at the office; I should be able to walk you through it

                            800-457-9112

                            Ext. 46

                            I think I know what you are doing wrong!

                            Bob

                            Comment


                            • #15
                              Thanks Bob, I'll give you a call tomorrow. I just checked this post after coming home from shopping. Are you reading the posts about the viruses? Seems Sharon had the same problem I had.

                              Thanks muchly!!

                              Betty
                              Betty

                              "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

                              Comment

                              Unconfigured Ad Widget

                              Collapse

                              Latest Topics

                              Collapse

                              • alexscrollsaw
                                Firefighter
                                by alexscrollsaw
                                Firefighter - my latest
                                I added two colored variant, recommended size 7 x 8 inches, 4 layers.

                                Firefighter pattern








                                ...
                                Yesterday, 08:27 AM
                              • Rolf
                                Reply to Hegner
                                by Rolf
                                The Hegner like some other saws have a sweet spot or not so sweet spot where they may vibrate. I know they need to have a solid footing.
                                When we were younger (2005) we used to bring our saws to our club meeting in an old barn with wooden floors. The seasoned scrollers all had Hegners. The rest...
                                Yesterday, 07:46 AM
                              • Rolf
                                Reply to Eccentric adjustment
                                by Rolf
                                I assume you are talking about changing the stroke length. Looking at the manual it says you can shorten it for cutting thin wood and or metal. I have never known anyone that did that. We have several Hegner owners in our club. I am not one of them.
                                Yesterday, 07:37 AM
                              • Dave56
                                Eccentric adjustment
                                by Dave56
                                Has anyone made any adjustments to the eccentric or connectors on the Hegner M22
                                03-30-2023, 04:59 PM
                              • Dave56
                                Reply to Hegner
                                by Dave56
                                Has anyone replaced the eccentric on the Hegner scroll saw or made any adjustments to this part.
                                I bought an used Hegner m22 and it vibrates at about 3/4 speed. Maybe I'm just over thinking this problem, last year I purchased a multi cut 3/25 inch Hegner it is a single speed and it runs like a...
                                03-30-2023, 04:50 PM
                              Working...
                              X